Strongly Orthotropic Open Cell Porous Metal Structures for Heat Transfer Applications

Abstract

For modern thermal applications, open cell porous metals provide interesting opportunities to increase performance. Several types of cellular metals show an anisotropic morphology. Thus, using different orientations of the structure can boost or destroy the performance in thermal applications. Examples of such cellular anisotropic structures are lotus-type structures, expanded sheet metal, and metal fiber structures. Lotus-type structures are made by casting and show unidirectional pores, whereas expanded sheet metal structures and metal fiber structures are made from loose semi-finished products that are joined by sintering and form a fully open porous structure. Depending on the type of structure and the manufacturing process, the value of the direction-dependent heat conductivity may differ by a factor of 2 to 25. The influence of the measurement direction is less pronounced for the pressure drop; here, the difference varies between a factor of 1.5 to 2.8, depending on the type of material and the flow velocity. Literature data as well as own measurement methods and results of these properties are presented and the reasons for this strongly anisotropic behavior are discussed. Examples of advantageous applications, for example a latent heat storage device and a heat exchanger, where the preferential orientations are exploited in order to gain the full capacity of the structure’s performance, are introduced.

Experimentally Measured Thermal Masses of Adsorption Heat Exchangers

“…The fibrous structures are directly crystallized with SAPO-34 with the partial support transformation (PST) technique [37]. The fibrous structures are made of aluminum fibers sintered together, brazed onto the aluminum flat tubes and finally coated with adsorbent crystals [38]. The first experimental results for directly crystallized fibrous structures showed the potential of this approach to massively increase power density [39].…”

High and tuneable anisotropic thermal conductivity controls the temperature distribution of 3D printed all-polyethylene objects

“…In a broader context, our observed thermal conductivities can also be achieved by other material classes, e.g. ceramics, 47–49 metallic foams, 50,51 or other composite materials. Depending on the desired field of application and processing methods at hand, such other material classes can also be tuned for optimum performance with respect to their anisotropy, usable temperature range, or environmental resilience.…”

Zeolite NaY-Copper Composites Produced by Sintering Processes for Adsorption Heat Transformation—Technology, Structure and Performance

“…A common approach for the optimization is to use heat exchanger structures with large surfaces, allowing the application of relatively thin films of the adsorbent, and short diffusion and thermal transport lengths. Brazed or sintered metal fibers [31,34,35], metal foams [34], or brazed metal textiles are examples of structures offering significantly increased surfaces in comparison to conventional lamella heat exchangers [10]. The latter, however, have the advantage of well-established cheap processes for the production, including the heat transfer fluid cycle and the well-directed thermal conductivity of the lamellas.…”