Structural Evolution of Molybdenum Carbides in Hot Aqueous Environments and Impact on Low-Temperature Hydroprocessing of Acetic Acid

Abstract

Abstract:We investigated the structural evolution of molybdenum carbides subjected to hot aqueous environments and their catalytic performance in low-temperature hydroprocessing of acetic acid. While bulk structures of Mo carbides were maintained after aging in hot liquid water, a portion of carbidic Mo sites were converted to oxidic sites. Water aging also induced changes to the non-carbidic carbon deposited during carbide synthesis and increased surface roughness, which in turn affected carbide pore volume and surface area. The extent of these structural changes was sensitive to the initial carbide structure and was lower under actual hydroprocessing conditions indicating the possibility of further improving the hydrothermal stability of Mo carbides by optimizing catalyst structure and operating conditions. Mo carbides were active in acetic acid conversion in the presence of liquid water, their activity being comparable to that of Ru/C. The results suggest that effective and inexpensive bio-oil hydroprocessing catalysts could be designed based on Mo carbides, although a more detailed understanding of the structure-performance relationships is needed, especially in upgrading of more complex reaction mixtures or real bio-oils. OPEN ACCESSCatalysts 2015, 5 407

Ni-Doping Effects on Oxygen Removal from an Orthorhombic Mo2C (001) Surface: A Density Functional Theory Study

“…Indeed, X-ray photoelectron spectroscopy of passivated Mo 2 C samples often shows the presence of the Mo oxide species such as MoO 3 on the surface. 15,38,39 Overall, the Ni-doped Mo 2 C had a lower H 2 O formation than the undoped Mo 2 C stored in air for a similar duration. In fact, the difference was significant; the Ni−Mo 2 C stored for 12 months had a H 2 O formation level (based on the area under the H 2 O curves in Figure 5) similar to the Mo 2 C stored for only 1 month.…”

Valorization of Biomass‐derived Small Oxygenates: Kinetics, Mechanisms and Site Requirements of H2‐involved Hydrogenation and Deoxygenation Pathways over Heterogeneous Catalysts

“…Although this study investigated the HDO of furfural, a molecule out of the scope of the present review, these results are considered to carry broad implications for enabling active and selective liquid‐phase HDO of oxygenates at mild conditions on solvent‐modified surfaces of carbide catalysts. While the stability of carbides in aqueous phase is potentially a problem, stable phases may result after an induction period or aging pretreatment, therefore still holding promise in a broader span of processing scenarios . Deng et al.…”

Hydrodeoxygenation of Guaiacol with Molybdenum‐Carbide‐Based Carbon Catalysts

“…Molybdenum carbide‐based catalysts exhibit high catalytic activity and selectivity in the processes of hydrogenation, hydrodesulfurization, hydrodenitrogenation, hydrodearomatization, methane reforming, Fischer‐Tropsch, aromatization, isomerization, as well as electrocatalysts . In addition, recent studies have shown, molybdenum carbides can remove oxygen from a number of oxygen‐containing compounds which are present in the liquid biomass pyrolysis product such as ethylene glycol, furfural, anisole, phenol, guaiacol, acetic acid and levulinic acid …”

“…Some studies have shown the molybdenum carbides can be effective for the HDO process despite the presence of water . It is a remarkable feature of the catalyst even a high concentration of water which is produced in the process of bio‐oil conversion.…”