Structural Health Monitoring of a Historical Masonry Bell Tower Using Operational Modal Analysis

Abstract

This paper addresses the modal and structural identification of the historical masonry bell tower of Ficarolo, in Italy. After the seismic sequence of May 2012, the tower reported a serious damage pattern. Retrofitting interventions were designed and they mainly consisted in the rebuilding of cracked zones and the strengthening of masonry walls with carbon bars embedded in the masonry with epoxy resin. Afterwards, a continuous dynamic monitoring system has been installed on the tower. From the recorded structural response under ambient excitation, the dynamic characteristics of the tower are identified using Operational Modal Analysis techniques. Results of the first months of continuous monitoring are presented in this paper. Moreover, in order to analyse the evolution of the structural behaviour, the effect of changing temperature on the identified natural frequencies is investigated. The experimental modal parameters are also used to identify the elastic modulus of the reinforced masonry through the calibration of a Finite Element (FE) model of the tower. In addition, the influence of the soil-foundation system on the structural behaviour is evaluated. The calibration procedure is performed adopting an improved surrogate-assisted evolutionary strategy. The calibrated FE model can be adopted to simulate the structural response to far-field earthquakes. Moreover, the monitoring system can give valuable information on the structural behaviour and the structural health in the case of seismic events.

Rapid Identification of Post-Earthquake Collapsed Buildings via Multi-Scale Morphological Profiles With Multi-Structuring Elements

“…Remote sensing technology has proved to be a convenient, rapid and cost-effective way to help extraction and monitor earthquake damage information. Currently, a variety of algorithms have been used for earthquakedamaged buildings extracting at home and abroad and obtained a series of achievements [6][7][8][9][10][11][12]. For multitemporal technology is sensitive to the registration accuracy [6,8,10,[13][14], and pre-earthquake images in the same area are often difficult to obtain, studies on earthquakedamaged building extraction are mostly focused on the single-temporal detection technology [15,16], which can be divided into pixel-based detections [13] and objectoriented detections [16], in accordance with the different information processing units.…”

Research on the Signal Reconstruction of the Phased Array Structural Health Monitoring Based Using the Basis Pursuit Algorithm

“…The data acquisition and processing system is an important part of the structural health monitoring. Many scholars internationally have implemented different signal processing methods in structural health monitoring, such as model analysis [Bassoli, Forghieri and Vincenzi (2017)], system identification [Nagarajaiah (2107)], wavelet transform, optimization calculation [Li (2015)] and so on. However, the majority of research findings are based on the simplified structure and carried out in a controllable laboratory environment.…”

Analysis on thermodynamic performance of ancient pagodas considering flow heat transfer properties

“…It is a money-consuming task to preserve the original physical structure of ancient pagodas, owing to their long history [4][5][6][7][8]. Heating, cooling and ventilation should also be considered for some ancient pagodas, which are open to the public as historical and cultural landscapes [9].…”