Structure-property relationships in thermally aged cellulose fibers and paper

Abstract

The research presented in this paper investigates the effect of thermally accelerated aging on the submicrostructure of cellulose and attempts to relate such changes to the well‐documented loss of mechanical strength in aged paper. Filter paper and ramie fibers samples were aged in vacuo at 160°C. Small angle X‐ray scattering (SAXS) was used to study void structure within the fibers and hydration used as a structural probe. On hydration, the void radius of gyration and area decrease, while the void aspect ratio and overall void fraction increase. After aging, the wet structure more closely resembles the dry, suggesting that water cannot expand the structure to the same extent. It is postulated that increases in local ordering on aging create a structure more resistant to disruption by water. The use of additional techniques, namely Fourier transform IR spectroscopy, wide angle X‐ray scattering, scanning electron microscopy (SEM), environmental SEM, and measurement of water retention value, provided additional indirect support for the postulated model. There is no direct evidence for significant crystallinity changes in aged material, suggesting that if structural rearrangements occur, they will be local in nature. There is also no evidence for the formation of covalent crosslinks or new chemical species on aging. Water retention values and wet SAXS results concur, highlighting the importance of water in the cellulose structure and the reduced capacity for water sorption in aged samples. SEM observations show that the failure mechanism in paper changes with age from fibers pull out (i.e., interfiber bond failure) to fiber failure, and wide and zero span tensile tests indicate a weakening of the fibers. These results are consistent with previous reports, and we attribute them primarily to chain scission, although the increased intrafiber bonding may have an influence on the values obtained. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1465–1477, 1999

Effects of natural and artificial ageing on the physical and acoustic properties of wood in musical instruments

“…From these results, the crystallization of cellulose can be concluded to be a minor mechanism for the enhancing effects of ageing. Other possible mechanisms include hornification [9], the cross-linking reaction in lignin, and the rearrangement of disordered polysaccharides, but those hypotheses require further experimentation.…”

Effects of heating humidity on the physical properties of hydrothermally treated spruce wood

“…They speculated that the accessibility of wood is reduced by the dehydration of amorphous wood polymers during or after the heating. In the present study, however, the EMC was recovered considerably by the moistening, whereas the term hornification is generally used for the irreversible reduction in accessibility and mobility of polymers due to drying (Kato and Cameron 1999). Therefore, the hornification is excluded from the present discussion.…”

Combined effects of ZnO particle deposition and heat treatment on dimensional stability and mechanical properties of poplar wood

“…There were two main reasons for the improvement. Firstly, hemicellulose degraded in high temperature conditions, resulting in the decrease of free hydroxyl groups, improving the dimensional stability of wood 29 . Secondly, as shown in Fig.…”