Surface Miners: Evaluation of the Production Rate and Cutting Performance Based on Rock Properties and Specific Energy

Abstract

The purpose of this research was to evaluate the production rate (PR) and cutting performance of surface miners (SM) based on rock properties and specific energy (SE). We use data from equipment manufacturers and experimental data in this study and propose a new method and equations to determine both the PR and the cutting speed of SM. The unconfined compressive strength (UCS) of the rock, its abrasivity, and the machine's engine power are the three most important factors influencing the PR. Moreover, the cutting depth, UCS, and engine power have a significant impact on the cutting speed. We propose a new method and equations to determine the energy required to cut a volume unit and a surface unit, i.e., specific energy, and establish the relationship between SE, UCS, and PR. The results of this study can be used by surface miner operators to evaluate the applicability of the machines to a specific mine site.

Methods of Mechanical Mining of Compact-Rock—A Comparison of Efficiency and Energy Consumption

“…In some cases, the energy demand of this solution exceeds that of the conventional mechanical mining. One of the relevant and as yet unsolved problems is how to clearly assess the workability of a rock medium [44]. In qualitative terms there is general agreement between researchers that, as already mentioned, workability depends on compressive strength, tensile strength, shear strength, bedding, as well as the presence of weakened surfaces and hard minerals (above six on the Mohs scale).…”

A new rock cuttability index for predicting key performance indicators of surface miners

“…'k' value considered in the model also varies widely from 0.5 to 1.0 leaving scope for research. Origliasso et al [9] considered uniaxial compressive strength, rock abrasivity and machine power as key influencing parameters for production estimation by surface miner and the same is expressed as:…”

A feasibility study of surface miner

“…These improvements have enabled operators to excavate rock in a more eco-friendly and economical manner (Origliasso et al, 2014). The surface miner essentially comprises a cutting unit, disposing unit (windrowing/conveyor loading) and propelling unit (Dey & Ghose, 2011).…”