Synchronization of three-phase converters and virtual microgrid implementation utilizing the Power-Hardware-in-the-Loop concept

Abstract

This paper addresses the timely issues of synchronization and application of three-phase power converters connected in parallel utilizing the Power-Hardwarein-the-Loop concept. Without proper synchronization, distinguishing the currents circulating between the converters are unclear. The paper centers on control methodology for achieving precise phase synchronization for equal load sharing, with minimum current circulation between the paralleled power converter modules, and robust dynamic system control under different transient conditions. One of the possible applications for the configuration presented in this paper is the conceptual virtual microgrid, which utilizes the reactive power compensation ability of the Static Synchronous Compensator (STATCOM). The microgrid behavior and load dynamics are simulated with a real-time digital simulator which generates appropriate control commands to a power electronics based voltage amplifier interfaced via a cascaded LC-LC type filter to a variable speed drive (VSD). This is necessary as reactive power control is a critical consideration in improving the power quality of power systems. To compensate for reactive power, the STATCOM controller will be developed and integrated into the proposed virtual microgrid system. This concept provides a solution for de-risking these costs as it utilizes the PHIL concept in conjunction with high-fidelity microgrid model and detailed load dynamics. Selected experimental results on two, 25-kVA and 15-kVA, converters in parallel are presented. I.978-1-4244-4783-1/10/$25.00 ©2010 IEEE

Implementation and validation of advanced unintentional islanding testing using power hardware-in-the-loop (PHIL) simulation

“…Instead, an emerging approach is to test one or more ICSs by connecting them to a software-simulated distribution system model, which may also include other ICSs. This mixed fullpower hardware and software simulation approach, often called power hardware-in-the-loop (PHIL), has been used extensively to test many complex systems including small (<10 kW) [5], [6], [7], and large (500 kW) [8] grid-connected PV inverters, PV/super capacitor systems for power quality control [9], a microgrid-connected STATic synchronous COMpensator [10], and EPS-connected motor drives at the 25 kVA [11] and 5 MVA [12] power levels.…”

FACTS Providing Grid Services: Applications and Testing

“…Concerning FACTSs, PHIL simulations were performed in [114]; however, a hardware PV inverter was used, while a D-STATCOM was simulated in the DRTS. PHIL simulation for studying the synchronization issues of voltage source converters, including STATCOMs, was performed in [115]. Contrary to CHIL simulation, where only the control system is tested, in PHIL simulation, the hardware power device is tested, which includes both the control system and power circuit.…”

Real-Time Simulation Technique of a Microgrid Model for DER Penetration

“…Several researches involve the PHIL concept using the Real Time Digital Simulation (RTDS) [6] as a powerful tool to perform flexible and high-speed real time simulations [1][2][3], [7][8][9][10][11][12][13][14]. RTDS uses a graphical environment to build up the simulated network of any complexity.…”