Techno‐economics for conversion of lignocellulosic biomass to ethanol by indirect gasification and mixed alcohol synthesis

Abstract

This techno‐economic study investigates the production of ethanol and a higher alcohols coproduct by conversion of lignocelluosic biomass to syngas via indirect gasification followed by gas‐to‐liquids synthesis over a precommercial heterogeneous catalyst. The design specifies a processing capacity of 2,205 dry U.S. tons (2,000 dry metric tonnes) of woody biomass per day and incorporates 2012 research targets from NREL and other sources for technologies that will facilitate the future commercial production of cost‐competitive ethanol. Major processes include indirect steam gasification, syngas cleanup, and catalytic synthesis of mixed alcohols, and ancillary processes include feed handling and drying, alcohol separation, steam and power generation, cooling water, and other operations support utilities. The design and analysis is based on research at NREL, other national laboratories, and The Dow Chemical Company, and it incorporates commercial technologies, process modeling using Aspen Plus software, equipment cost estimation, and discounted cash flow analysis. The design considers the economics of ethanol production assuming successful achievement of internal research targets and nth‐plant costs and financing. The design yields 83.8 gallons of ethanol and 10.1 gallons of higher‐molecular‐weight alcohols per U.S. ton of biomass feedstock. A rigorous sensitivity analysis captures uncertainties in costs and plant performance. © 2012 American Institute of Chemical Engineers Environ Prog, 2012

A techno-economic review of thermochemical cellulosic biofuel pathways

“…Finally, Dutta et al (2014) presents the most recent update of the model which is based on the results of a combination of bench-and pilot-scale experiment performed by NREL, Dow Chemical, and Rentech. This analysis concludes that it is possible based on current technology to achieve the $3.33/gge ($0.88/lge) MFSP calculated by Dutta et al (2012), although it again assumes a 30-year biorefinery lifespan. Gonzalez et al (2012) uses a modified version of NREL's MAS pathway model to quantify the pathway's techno-economics under five lignocellulosic feedstock scenarios: loblolly pine, natural hardwood, eucalyptus, stover, and switchgrass.…”

“…This model is adjusted slightly in a 2009 analysis to compare the MAS pathway with a biochemical pathway and calculates a MFSP of $1.98/gge ($0.52/lge) (Foust et al, 2009). Dutta et al (2012) updates the 2007 analysis to reflect new data and developments on feedstock costs, gasifier syngas yields, mixed alcohols synthesis, and capital and operating cost estimates. The updated model calculates a significantly higher TPI of $560 million and a MFSP of $3.33/ gge ($0.88/lge) with an assumed feedstock cost of $73.48/MT.…”

Mild catalytic pyrolysis of biomass for production of transportation fuels: a techno-economic analysis

“…Other equipment costs, such as those of distillation columns, flash tanks, compressors and motors are calculated using ChemCAD built-in costing after sizing and the rest is obtained from publicallyavailable literature. 4,30,33,35,38,39 A fixed-factor method is used as described in Table 3 to obtain TPI from total purchased equipment cost (TPEC) in order to avoid the significant variances reported for individual equipment factors. 40 Lang factor multiplier represents TPI/TPEC.…”

Improving the selectivity to C4 products in the aldol condensation of acetaldehyde in ethanol over faujasite zeolites

“…The abundant supply of ethanol from a variety of possible renewable sources makes it an attractive feedstock for the production of commodity chemicals, such as BD [6][7][8][9][10][11][12][13].…”