The Effect of Exposure on the Autogenous Self-Healing of Ordinary Portland Cement Mortars

Abstract

Exposure conditions are critical for the autogenous self-healing process of Portland cement based binder matrixes. However, there is still a significant lack of fundamental knowledge related to this factor. The aim of this paper was to investigate and understand the effects of various potentially applicable curing solutions on the efficiency of the crack closure occurring both superficially and internally. Four groups of exposures were tested, including exposure with different water immersion regimes, variable temperatures, application of chemical admixtures, and use of solutions containing micro particles. The self-healing process was evaluated externally, at the surface of the crack, and internally, at different crack depths with the use of optical and scanning electron microscopes (SEM). The phase identification was done with an energy dispersive spectrometer combined with the SEM. The results showed very limited self-healing in all pure water-based exposures, despite the application of different cycles, temperatures, and water volumes. The addition of a phosphate-based retarding admixture demonstrated the highest crack closure, both internally and externally. The highest strength recovery and a very good crack closure ratio was achieved in water exposure containing micro silica particles. The main phase observed on the surface was calcium carbonate, and internally, calcium silicate hydrate, calcium carbonate, and calcium phosphate compounds. Phosphate ions were found to contribute to the filling of the crack, most likely by preventing the formation of a dense shell composed of hydration phases on the exposed areas by crack unhydrated cement grains as well as by the additional precipitation of calcium and phosphate-based compounds. The micro sized silica particles presumably served as nucleation sites for the self-healing products growth. Changes in the chemical composition of the self-healing material were observed with a distance from the surface of the specimen.

Eco-UHPC as Repair Material—Bond Strength, Interfacial Transition Zone and Effects of Formwork Type

“…However, due to a high amount of unhydrated cement and limestone particles, the material has self-healing potential, which could be further improved by the application of a more efficient curing regime. Recent results have shown that curing of cracked concrete with a mixture of water and retarding admixture can lead to a successful self-healing [ 73 ].…”

Is Cement Paste Modified with Carbon Nanomaterials Capable of Self-Repair after a Fire?

“…• The exposure used to activate the recovery process was limited to water cycles. Recent results [9] showed that applying different solutions as healing activators, e.g. lime water or a mixture of water with retarding admixture can increase the efficiency of the selfhealing process; • Due to possible agglomeration issues [36], the amount of nanomaterials applied in this experiment was relatively small, i.e.…”

“…Ordinary concrete has an in-built ability to repair its damage for cracks up to 150 µm when exposed to water, called autogenous self-healing [6]. The efficiency of the autogenous self-healing can be improved with "boosting" ingredients, e.g., the addition of certain types of fibres [7,8] or specific exposure conditions [9]. The properties of high-temperature damaged concrete can also be partially "healed" by exposing it to post-fire curing.…”

Concrete Early-Age Crack Closing by Autogenous Healing

“…In that specific case, cracks of size 0.458 mm were completely closed by autogenous self-healing in 30 days by the production of calcium carbonate (CaCO 3 ). Another study analyzed concrete healing in water containing micro silica particles [13] and detected precipitates of calcium silicate hydrate and calcium carbonate in the interior of the crack, improving the crack healing efficiency.…”