The impact of building height on urban thermal environment in summer: A case study of Chinese megacities

Abstract

The quantitative relationship between the spatial variation of building’s height and the associated land surface temperature (LST) change in six Chinese megacities is investigated in this paper. The six cities involved are Beijing, Shanghai, Tianjin, Chongqing, Guangzhou, and Shenzhen. Based on both remote sensing and building footprint data, we retrieved the LST using a single-channel (SC) algorithm and evaluate the heating/cooling effect caused by building-height difference via correlation analysis. The results show that the spatial distribution of high-rise buildings is mainly concentrated in the center business districts, riverside zones, and newly built-up areas of the six megacities. In the urban area, the number and the floor-area ratio of high to super high-rise buildings (>24m) account for over 5% and 4.74%, respectively. Being highly urbanized cities, most of urban areas in the six megacities are associated with high LST. Ninety-nine percent of the city areas of Shanghai, Beijing, Chongqing, Guangzhou, Shenzhen, and Tianjin are covered by the LST in the range of 30.2~67.8°C, 34.8~50.4°C, 25.3~48.3°C, 29.9~47.2°C, 27.4~43.4°C, and 33.0~48.0°C, respectively. Building’s height and LST have a negative logarithmic correlation with the correlation coefficients ranging from -0.701 to -0.853. In the building’s height within range of 0~66m, the LST will decrease significantly with the increase of building’s height. This indicates that the increase of building’s height will bring a significant cooling effect in this height range. When the building’s height exceeds 66m, its effect on LST will be greatly weakened. This is due to the influence of building shadows, local wind disturbances, and the layout of buildings.

Fine-Scale Urban Heat Patterns in New York City Measured by ASTER Satellite – The Role of Complex Spatial Structures

“…Under such conditions, less incident radiation will likely be absorbed on the urban surfaces (horizontal and/or vertical), leading to cooler urban surfaces. Wang and Xu (2021) also indicate that land surface temperature decreases significantly with building height differences and brings a cooling effect.…”

Evaluating the Influence of Different Layouts of Residential Buildings on the Urban Thermal Environment

“…In addition to the different building arrangements, building height and vegetation affect the air temperature distribution in architectural layouts. Using a remote sensing method, Wang and others found that an increase in building height will produce a cooling effect [24]. In addition, some studies have reported that adding a single building construction area and increasing the number of floors can increase the shading effect [25].…”

Street-level temperature estimation using Graph Neural Networks: Performance, feature embedding and interpretability

“…For example, tall buildings in the upwind direction may largely alter the mixing condition of the street, thus having a stronger influence on street-level temperature (Gao et al, 2022). A similar situation applies to the localized shading effect from trees and buildings, which plays a major role in energy re-distribution in the built environment (Park et al, 2021;Wang, M and Yang, J., 2021).…”