As a refractory industrial solid waste, high-alumina fly ash is discharged
into nature in large quantities, causing serious environmental harm. The
extraction of valuable components, such as aluminum, from high-alumina fly
ash has become a research hotspot at home and abroad. The shortcomings of
traditional alumina extraction from high-alumina fly ash include long
technological processes, large amounts of waste acid and alkali, and serious
equipment corrosion. A novel method for alumina preparation by
electrotransformation AlCl3 solution(EAS) under NH4Cl catalysis with
injected CO2 has been proposed by Northeastern University. The process has
advantages, such as short flow and no waste acid discharge. In this study,
the influence of initial NH4Cl concentration in the cathodic chamber on
solution pH, phase and morphology of electrotransformation products, phase,
D(50) and D(90) of roasting products, and Al recovery rate were examined.
Simultaneously, EAS was examined and compared with and without injected CO2
as well as EAS under NH4Cl catalysis with and without injected CO2. The
results showed that, when the solution in the cathodic chamber was NH4Cl
with CO2 injection, with electrotransformation time extension, pH increased
slowly and the morphology of electrotransformation products were all rough
and fluffy block structures. Increasing initial NH4Cl concentration
effectively improved the product crystallization states, roasting products
D(50) and D(90), and Al recovery rate.