Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size

Abstract

Tissue engineering applications commonly encompass the use of three-dimensional (3D) scaffolds to provide a suitable microenvironment for the incorporation of cells or growth factors to regenerate damaged tissues or organs. These scaffolds serve to mimic the actual in vivo microenvironment where cells interact and behave according to the mechanical cues obtained from the surrounding 3D environment. Hence, the material properties of the scaffolds are vital in determining cellular response and fate. These 3D scaffolds are generally highly porous with interconnected pore networks to facilitate nutrient and oxygen diffusion and waste removal. This review focuses on the various fabrication techniques (e.g., conventional and rapid prototyping methods) that have been employed to fabricate 3D scaffolds of different pore sizes and porosity. The different pore size and porosity measurement methods will also be discussed. Scaffolds with graded porosity have also been studied for their ability to better represent the actual in vivo situation where cells are exposed to layers of different tissues with varying properties. In addition, the ability of pore size and porosity of scaffolds to direct cellular responses and alter the mechanical properties of scaffolds will be reviewed, followed by a look at nature's own scaffold, the extracellular matrix. Overall, the limitations of current scaffold fabrication approaches for tissue engineering applications and some novel and promising alternatives will be highlighted.

Endochondral Ossification for Enhancing Bone Regeneration: Converging Native Extracellular Matrix Biomaterials and Developmental Engineering In Vivo

“…BMSC recruitment also involves successful cellular migration into the scaffold, which may be limited by physical constraints within the implant (e.g., small pore size, limited pore connectivity). 101 By incorporating a donor stem cell population within an implant instead, these cellular recruitment challenges may be overcome.…”

Osteogenic Differentiation and Mineralization on Compact Multilayer nHA-PCL Electrospun Scaffolds in a Perfusion Bioreactor

“…The total porosity (Φ) of scaffolds is measured according to Eq. 1 (24): (1) Where ρ s is the ratio of scaffold mass to its volume and ρ t is total density of the components that contribute to fabricate the scaffold. …”

Emergence of Bioprinting in Tissue Engineering: A Mini Review

“…2 For this purpose, several conventional fabrication techniques (e.g., freeze drying, electro spinning, etc.) have been used to fabricate 3D porous scaffolds, but not able to provide ideal or optimum 3D microenvironment by mimicking the targeted native tissues, in terms of controlling architecture of scaffold, pore-size and shape, degradation behavior (based on exposed surface area) for tissue regeneration process depending on particular cell or tissue type in vitro and in vivo.…”