Traffic Vehicle Counting in Jam Flow Conditions Using Low-Cost and Energy-Efficient Wireless Magnetic Sensors

Abstract

The jam flow condition is one of the main traffic states in traffic flow theory and the most difficult state for sectional traffic information acquisition. Since traffic information acquisition is the basis for the application of an intelligent transportation system, research on traffic vehicle counting methods for the jam flow conditions has been worthwhile. A low-cost and energy-efficient type of multi-function wireless traffic magnetic sensor was designed and developed. Several advantages of the traffic magnetic sensor are that it is suitable for large-scale deployment and time-sustainable detection for traffic information acquisition. Based on the traffic magnetic sensor, a basic vehicle detection algorithm (DWVDA) with less computational complexity was introduced for vehicle counting in low traffic volume conditions. To improve the detection performance in jam flow conditions with a “tailgating effect” between front vehicles and rear vehicles, an improved vehicle detection algorithm (SA-DWVDA) was proposed and applied in field traffic environments. By deploying traffic magnetic sensor nodes in field traffic scenarios, two field experiments were conducted to test and verify the DWVDA and the SA-DWVDA algorithms. The experimental results have shown that both DWVDA and the SA-DWVDA algorithms yield a satisfactory performance in low traffic volume conditions (scenario I) and both of their mean absolute percent errors are less than 1% in this scenario. However, for jam flow conditions with heavy traffic volumes (scenario II), the SA-DWVDA was proven to achieve better results, and the mean absolute percent error of the SA-DWVDA is 2.54% with corresponding results of the DWVDA 7.07%. The results conclude that the proposed SA-DWVDA can implement efficient and accurate vehicle detection in jam flow conditions and can be employed in field traffic environments.

Evaluation of a Wi-Fi Signal Based System for Freeway Traffic States Monitoring: An Exploratory Field Test

“…New wireless sensors provide opportunities for researchers and practitioners to comprehensively perceive the whole transportation network, and to collect diverse information. Bao et al [24] presented a solution to accurate counting of vehicles under jam flow conditions through wireless magnetic sensors. To identify vehicles’ locations and corresponding traffic measurements, Jeon et al [25] employed wireless ultrasonic sensors to laterally scan multiple lanes.…”

An Improved Roadside Parking Space Occupancy Detection Method Based on Magnetic Sensors and Wireless Signal Strength

“…According to [22,23], we can achieve vehicle detection by analyzing the data characteristics of magnetic disturbance signals caused by the vehicles on the WVDs. However, the magnetic signals are easily affected by the adjacent vehicles, including the nonstandard parked vehicles on the adjacent parking spaces and irregularly traveling vehicles on adjacent lanes, such as the red and blue cars shown in Figure 1.…”

Advanced Emergency Braking Control Based on a Nonlinear Model Predictive Algorithm for Intelligent Vehicles

“…where φ ∈ R + ; γ ∈ R + ; m and n are positive odd numbers with 0 < m/n < 1. Solving simultaneously Equations (29), (30), (32), and (33) will give us the control rate of NFTSM:…”

“…Based on adaptive cruise control (ACC), cooperative adaptive cruise control (CACC) has been developing rapidly, and can effectively improve the traffic capacity, efficiency, and fluency [27,28]. The combined information from front onboard sensors is used to control the lateral movement of autonomous vehicles [29][30][31][32]. The combined solution of one-dimensional and two-dimensional information is applied to collision avoidance via steering assistance, automatic braking, and warning of collisions for urban vehicles [33].…”