experience is dramatically improved. Despite the advantages, there are still existing challenges hindering the hydrogelbased soft electronics toward practical use. Particularly, most of the conductive hydrogels are comparing conductive nano-fillers (e.g., metal nano wire, [9,10] graphene, [11] carbon nanotubes, [12] and Perovskite [13] ) and polymer networks. [14,15] The mechanical mismatch between the rigid filler and soft polymer bulk will lead to concentrated internal stress and further affect the performance and lifetime of conductive hydrogel.In the past decade, liquid metals (LMs) [16][17][18] are emerging as novel conductive fillers for soft electronics, and among them, eutectic gallium and indium alloys (EGaIn) are the most widely used due to their negligible toxicity, low cost, and good thermal and electrical conductivity. More importantly, the melting point could be controlled below room temperature by appropriately adjusting the ratio of the Ga and In components, thus rendering EGaIn excellent ductility and fluidity to address the issues caused by rigid conductive fillers. Many studies have shown by using ultrasonic treatment, [19][20][21][22][23] EGaIn could be effectively dispersed in hydrophilic polymer precursor solutions, including polyvinyl alcohol, acrylic acid, and acryl amide. [24][25][26][27][28] After gelation process EGaIn is well distributed in polymer matrix as micro or nano size droplets, and the resulted hydrogels are endowed with unique thermal or electrical properties for different applications, such as tunable actuator or pressure sensor to discern bodily motions. However, it is noticeable that there is a reluctant use of peroxide initiator and toxic crosslinker for polymerization. The leaking risk of these agents and the poor degradability of the synthetic polymers have limited the hydrogels for bioengineering and in vivo biomedicals.Nowadays, with the increasing demand for ecologically sustainable and environment friendly materials, biopolymers are encouraged to replace the synthetic polymers to explore new advances in soft electronics. Generally, polysaccharide [29][30][31] and polypeptide [32,33] are the two typical types of biopolymers abundant in plants and animals, respectively. Since they are naturally occurred, biopolymers inherit the diverse structures and topologies in nature thus avoiding the toxic and complex polymeric synthesis process. In addition, due to their biodegradability and biocompatibility, biopolymers are extremely suitable for the use in wearable, [34] Gelatin, as a polypeptide-based biopolymer derived from animal resources, has a great potential to take the place of synthetic polymers for the development of next-generation electronic skin with enhanced biocompatibility and biodegradability. However, the soft and brittle nature of polypeptide hydrogel still remains as a challenge hindering its step to achieve skinlike properties and toward practical applications. Herein, a gelatin-based organohydrogel using liquid metal (LM) nanodroplets as functional filler...