Valorization of Banana Peel Using Carbonization: Potential Use in the Sustainable Manufacturing of Flexible Supercapacitors

Abstract

Sustainable and environmentally friendly activated carbon from biomass materials is proposed to produce supercapacitors from banana peels and has the potential to replace the non-sustainable and hazardous process from either graphite or/and fossil fuels. In order to determine the potential of using banana peel for supercapacitor application, raw banana peel, a bio-waste, was activated both mechanically and chemically to observe the real differences. The sample was activated at 700 °C and chemically activated using KOH. Characterization of activated banana peel was performed using FTIR, DLS, TGA and XRD analytical equipment. FTIR analysis revised the presence of hydroxyl, carbonyl and aromatic compounds on a banana peel cellulose-based carbon. The TGA results proved that 700 oC could be sufficient to totally carbonize banana peel. DLS clearly showed a strong difference between the carbonized and KOH-activated material in particle size distribution. Meanwhile, surface area analysis using BET displayed an increase from 553.862 m²/g to 565.024 m²/g BET in surface area (SBET) when carbon was activated using KOH with a nitrogen isotherm at 77.350K. Specific capacitance was increased from 0.3997 Fg−1 to 0.821 Fg−1, suggesting more than a 100% increase in the specific capacity due to KOH activation, as proved by the cyclic voltammetry (CV) curve. The X-ray diffraction results revealed the patterns of activated carbon. The findings demonstrated the feasibility of using banana peel waste as a low-cost and sustainable material for the preparation of flexible supercapacitor batteries.

Review on Conductive Polymer Composites for Supercapacitor Applications

“…In the pursuit of efficient and sustainable energy storage solutions, supercapacitors have emerged as promising devices with the ability to deliver high power densities, rapid charge/discharge rates, and extended cycle lifespans [7,8]. Among the various materials explored for supercapacitor electrodes, conductive polymer composites have gained considerable attention due to their unique combination of electrical conductivity, mechanical flexibility, and facile processability [9].…”

Recent Progress in Self-Healable Hydrogel-Based Electroluminescent Devices: A Comprehensive Review

“…Flexible electronics have been explored for several applications, including flexible circuits, flexible displays, flexible solar cells, skin-like pressure sensors and conformable radio-frequency identification (RFID) tags [ 10 ]. In addition, flexible electronics have found diverse applications in health monitoring [ 11 ], emotion detection [ 12 ], electroluminescence device fabrication [ 13 ], supercapacitors [ 14 , 15 ] and so on. Inspiration from these diverse applications of flexible electronics and the extra-ordinary properties of hydrogels have made the development of functional and smart materials, such as the fabrication of electroluminescent devices, became a hot topic again [ 16 ].…”

Highly Conductive Films Through PEDOT‐PSS Ink Formulation via Doping Using Spontaneous Wicking of Liquids for Supercapacitor Applications

“…Among them, supercapacitors and lithium-ion batteries are the most researched ones. [1][2][3][4][5][6][7][8] Supercapacitors are the most permissible energy storage materials for various applications such as smart and wearable clothes, [9,10] hybrid electric vehicles, [11] and automobiles (regenerative braking). [12] They are used in applications that require fast charge and discharge cycles.…”