The CUPID Collaboration is designing a tonne-scale, background-free detector to search for double beta decay with sufficient sensitivity to fully explore the parameter space corresponding to the inverted neutrino mass hierarchy scenario. One of the CUPID demonstrators, CUPID-Mo, has proved the potential of enriched Li$$_{2}$$ 2 $$^{100}$$ 100 MoO$$_4$$ 4 crystals as suitable detectors for neutrinoless double beta decay search. In this work, we characterised cubic crystals that, compared to the cylindrical crystals used by CUPID-Mo, are more appealing for the construction of tightly packed arrays. We measured an average energy resolution of ($$6.7\pm 0.6$$ 6.7 ± 0.6 ) keV FWHM in the region of interest, approaching the CUPID target of 5 keV FWHM. We assessed the identification of $$\alpha $$ α particles with and without a reflecting foil that enhances the scintillation light collection efficiency, proving that the baseline design of CUPID already ensures a complete suppression of this $$\alpha $$ α -induced background contribution. We also used the collected data to validate a Monte Carlo simulation modelling the light collection efficiency, which will enable further optimisations of the detector.

A scintillating bolometer based on a large cubic Li 2 100 MoO 4 crystal (45 mm side) and a Ge wafer (scintillation detector) has been operated in the CROSS cryogenic facility at the Canfranc underground laboratory in Spain. The dual-readout detector is a prototype of the technology that will be used in the next-generation 0 2 experiment CUPID. The measurements were performed at 18 and 12 mK temperature in a pulse tube dilution refrigerator. This setup utilizes the same technology as the CUORE cryostat that will host CUPID and so represents an accurate estimation of the expected performance. The Li 2 100 MoO 4 bolometer shows a high energy resolution of 6 keV FWHM at the 2615 keV line. The detection of scintillation light for each event triggered by the Li 2 100 MoO 4 bolometer allowed for a full separation (∼8) between () and events above 2 MeV. The Li 2 100 MoO 4 crystal also shows a high internal radiopurity with 228 Th and 226 Ra activities of less than 3 and 8 Bq/kg, respectively. Taking also into account the advantage of a more compact and massive detector array, which can be made of cubic-shaped crystals (compared to the cylindrical ones), this test demonstrates the great potential of cubic Li 2 100 MoO 4 scintillating bolometers for high-sensitivity searches for the 100 Mo 0 2 decay in CROSS and CUPID projects.

CUPID will be a next generation experiment searching for the neutrinoless double $$\beta $$ β decay, whose discovery would establish the Majorana nature of the neutrino. Based on the experience achieved with the CUORE experiment, presently taking data at LNGS, CUPID aims to reach a background free environment by means of scintillating Li$$_{2}$$ 2 $$^{100}$$ 100 MoO$$_4$$ 4 crystals coupled to light detectors. Indeed, the simultaneous heat and light detection allows us to reject the dominant background of $$\alpha $$ α particles, as proven by the CUPID-0 and CUPID-Mo demonstrators. In this work we present the results of the first test of the CUPID baseline module. In particular, we propose a new optimized detector structure and light sensors design to enhance the engineering and the light collection, respectively. We characterized the heat detectors, achieving an energy resolution of (5.9 ± 0.2) keV FWHM at the Q-value of $$^{100}$$ 100 Mo (about 3034 keV). We studied the light collection of the baseline CUPID design with respect to an alternative configuration which features gravity-assisted light detectors’ mounting. In both cases we obtained an improvement in the light collection with respect to past measures and we validated the particle identification capability of the detector, which ensures an $$\alpha $$ α particle rejection higher than 99.9%, fully satisfying the requirements for CUPID.

No abstract

Random coincidences of events could be one of the main sources of background in the search for neutrino-less double-beta decay of $$^{100}$$ 100 Mo with macro-bolometers, due to their modest time resolution. Scintillating bolometers as those based on Li$$_2$$ 2 MoO$$_4$$ 4 crystals and employed in the CROSS and CUPID experiments can eventually exploit the coincident fast signal detected in a light detector to reduce this background. However, the scintillation provides a modest signal-to-noise ratio, making difficult a pile-up pulse-shape recognition and rejection at timescales shorter than a few ms. Neganov–Trofimov–Luke assisted light detectors (NTL-LDs) offer the possibility to effectively increase the signal-to-noise ratio, preserving a fast time-response, and enhance the capability of pile-up rejection via pulse shape analysis. In this article we present: (a) an experimental work performed with a Li$$_2$$ 2 MoO$$_4$$ 4 scintillating bolometer, studied in the framework of the CROSS experiment, and utilizing a NTL-LD; (b) a simulation method to reproduce, synthetically, randomly coincident two-neutrino double-beta decay events; (c) a new analysis method based on a pulse-shape discrimination algorithm capable of providing high pile-up rejection efficiencies. We finally show how the NTL-LDs offer a balanced solution between performance and complexity to reach background index $$\sim $$ ∼ $$10^{-4}$$ 10 - 4 counts/keV/kg/year with 280 g Li$$_2$$ 2 MoO$$_4$$ 4 ($$^{100}$$ 100 Mo enriched) bolometers at 3034 keV, the Q$$_{\beta \beta }$$ β β of the double-beta decay, and target the goal of a next generation experiment like CUPID.