No abstract

This in vitro investigation was undertaken to explore two different nondestructive methods to detect very early demineralization. These methods were based on the premise that the clinical detection of caries at a very early stage of formation might permit more efficient reversal of the caries process than may occur when lesions are detected at a more advanced stage, such as a so-called ‘white spot’. The methods evaluated in this study were quantitative laser fluorescence (QLF) and an experimental dye-enhanced laser fluorescence (DELF) technique. Prepared and polished bovine enamel specimens were demineralized in a conventional lactic acid-Carbopol solution for varying periods of time between 0 and 24 h with an area of sound enamel retained on each specimen. The coded and randomized specimens were then analyzed for the presence and severity of enamel demineralization using QLF after which they were exposed to a selected dye (Pyrromethene 556) and similarly examined using DELF. The specimens were then sectioned and examined by conventional transverse microradiography and by confocal laser-scanning microscopy. Results were analyzed statistically with sensitivity and specificity determined using sound enamel as the reference. The results indicated that QLF could detect demineralization which occurred as a result of 8 h exposure to the decalcification solution and was able to quantify changes in lesion severity associated with longer demineralization. While DELF was capable of detecting enamel demineralization after only 2 h exposure to the decalcification solution, it was unable to quantify increasing amounts of demineralization associated with longer periods of exposure to the decalcification solution. In summary, while DELF was able to detect very early demineralization, only QLF was capable of detecting and quantifying changes in the extent of the decalcification occurring with demineralization periods up to 24 h.

PurposeThe goal of this work was to develop phantoms for the optimization of pre‐operative computed tomography (CT) scans of the prostate artery, which are used for embolization planning.MethodsAcrylonitrile butadiene styrene (ABS) pellets were doped with barium sulfate and extruded into filaments suitable for 3D printing on a fused deposition modeling (FDM) printer. Cylinder phantoms were created to evaluate radiopacity as a function of doping percentage. Small‐diameter tree phantoms were created to assess their composition and dimensional accuracy. A half‐pelvis phantom was created using clinical CT images, to assess the printer's control over cortical bone thickness and cancellous bone attenuation. CT‐derived prostate artery phantoms were created to simulate complex, contrast‐filled arteries.ResultsA linear relationship (R = 0.998) was observed between barium sulfate added (0%–10% by weight), and radiopacity (−31 to 1454 Hounsfield Units [HU]). Micro‐CT scans showed even distribution of the particles, with air pockets comprising 0.36% by volume. The small vessels were found to be oversized by a consistent amount of 0.08 mm. Micro‐CT scans revealed that the phantoms' interiors were completely filled in. The maximum HU values of cortical bone in the phantom were lower than that of the filament, a result of CT image reconstruction. Creation of cancellous bone regions with lower HU values, using the printer's infill parameter, was successful. Direct volume renderings of the pelvis and prostate artery were similar to the clinical CT, with the exception that the surfaces of the phantom objects were not as smooth.ConclusionsIt is possible to reliably create FDM 3D printer filaments with predictable radiopacity in a wide range of attenuation values, which can be used to print dimensionally accurate radiopaque objects derived from CT data. Phantoms of this type can be quickly and inexpensively developed to assess and optimize CT protocols for specific clinical applications.

This paper aims to present a simple overview of potential new diagnostic methods for dental caries. There are several novel methods of caries detection (with potential application to diagnosis) which have been proposed in the last few years, in addition to those that are gaining some commercial exposure and clinical acceptance. For the most part, these methods have been demonstrated in laboratories and are generally many years away from routine clinical application. They include multi-photon imaging, infrared thermography and infrared fluorescence, optical coherence tomography, ultrasound, and terahertz imaging.