No abstract

PSS conducting-polymer-silksericin composite is presented using a water-based, benchtop photolithographic process. Conducting microstructures formed on a flexible silk fibroin sheet allow a fully organic, flexible bioelectronic device. Large-area microfabricated devices such as biosensors that are biocompatible and degradable over a controlled period of time can be formed.

The synthesis of size and shape controlled Au/Ag/Pd alloy nanoparticles (NPs) and their self-supported assembly into monolithic aerogels for electro-oxidation of ethanol is reported. Two distinct morphologies of ultrasmall (3–5 nm) Au/Ag/Pd alloy NPs were produced via stepwise galvanic replacement of thiol-coated Ag NPs. The resultant nanoalloys were self-assembled into large, free-standing, aerogel superstructures that exhibit direct NP connectivity, high surface area (269 ± 18.1–76 ± 6.4 m2/g) and mesoporosity (2–50 nm), and high electrocatalytic activity via controlled oxidation of the surfactant ligands. The gelation kinetics have been tuned by varying the oxidant/surfactant molar ratio that governs the acidity of sol–gel reaction and consequently the extent of Ag dealloying with in situ generated HNO3. As-synthesized Au/Ag/Pd aerogels exhibit polymeric or colloidal gel morphology that can be manipulated by varying the shape and composition of precursor NPs. The electrocatalytic activity of ternary alloy aerogels for oxidation of ethanol was investigated using cyclic voltammetry and chronoamperometry. The monolithic aerogels exhibit high catalytic activity and durability, which is ∼20–30 times greater than those of the discrete Au/Ag/Pd alloy NPs. The polymeric morphology of high Pd-containing alloy aerogels resulted in ∼1 order of magnitude higher current density and mass activity in comparison to low Pd-containing colloidal aerogels. The synergistic effect of trimetallic alloy mitigates the catalyst poisoning effects and increases the stability and durability while the self-supported superstructure with direct NP connectivity, high surface area, and mesoporosity offers a facile conduit for both molecular and electron transport, enabling Au/Ag/Pd aerogel as a high-efficiency electrocatalyst.

Summary The present study reports the economic and sustainable syntheses of functional porous carbons for supercapacitor and CO2 capture applications. Lignin, a byproduct of pulp and paper industry, was successfully converted into a series of heteroatom‐doped porous carbons (LHPCs) through a hydrothermal carbonization followed by a chemical activating treatment. The prepared carbons include in the range of 2.5 to 5.6 wt% nitrogen and 54 wt% oxygen in its structure. All the prepared carbons exhibit micro‐ and mesoporous structures with a high surface area in the range of 1788 to 2957 m2 g−1. As‐prepared LHPCs as an active electrode material and CO2 adsorbents were investigated for supercapacitor and CO2 capture applications. Lignin‐derived heteroatom‐doped porous carbon 850 shows an outstanding gravimetric specific capacitance of 372 F g−1 and excellent cyclic stability over 30,000 cycles in 1 M KOH. Lignin‐derived heteroatom‐doped porous carbon 700 displays a remarkable CO2 capture capacity of up to 4.8 mmol g−1 (1 bar and 298 K). This study illustrates the effective transformation of a sustainable waste product into a highly functional carbon material for energy storage and CO2 separation applications.