No abstract

No abstract

No abstract

Nowadays the use of natural fiber composites has gained significant interest due to their low density, high availability, and low cost. The present study explores the development of sustainable 3D printing filaments based on rice husk (RH), an agricultural residue, and recycled polypropylene (rPP) and the influence of fiber weight ratio on physical, thermal, mechanical, and morphological properties of 3D printing parts. Thermogravimetric analysis revealed that the composite’s degradation process started earlier than for the neat rPP due to the lignocellulosic fiber components. Mechanical tests showed that tensile strength increased when using a raster angle of 0° than specimens printed at 90°, due to the weaker inter-layer bonding compared to in-layer. Furthermore, inter layer bonding tensile strength was similar for all tested materials. Scanning electron microscope (SEM) images revealed the limited interaction between the untreated fiber and matrix, which led to reduced tensile properties. However, during the printing process, composites presented lower warping than printed neat rPP. Thus, 3D printable ecofriendly natural fiber composite filaments with low density and low cost can be developed and used for 3D printing applications, contributing to reduce the impact of plastic and agricultural waste.

We describe a novel technique that we call tilt scanning interferometry to measure depth-resolved structure and displacement fields within semi-transparent scattering materials. The method differs significantly from conventional optical coherence tomography, in that only one wavelength is used throughout the whole measurement process. Temporal sequences of speckle interferograms are recorded while the illumination angle is tilted at constant rate. Fourier transformation of the resulting three-dimensional intensity distribution along the time axis reconstructs the scattering potential within the medium. Repeating the measurements with the object wave at equal and opposite angles about the observation direction results in two three-dimensional phase-change volumes, the sum of which gives the out-of-plane-sensitive phase volume and the difference between which gives the in-plane phase volume. From these phase-change volumes the in-plane and out-of-plane depth-resolved displacement fields are obtained. The theoretical framework for the technique is explained in detail and a practical optical implementation is described. Finally, results from proof-of-principle experiments involving a semi-transparent beam undergoing bending are presented.