Red mud (RM) is a solid waste derived from processing bauxite ore to produce alumina and is considered a hazardous waste due to its high pH. This paper describes the use of untreated mud and after calcination at distinct temperatures (450, 650, and 1000 °C) to attempt to improve its reactivity in cement mortars. In the formulations, Portland cement was replaced with up to 30 wt% red mud, and the addition of the red mud changed the hydration process, setting time, and workability. The temperature of hydration increased as more RM was added, particularly when calcined in the interval of 450-650 °C. In these conditions, the hydration process was accelerated, and the workability decreased. These findings indicate that the presence of red mud significantly altered important properties of Portland cement.

ResumoSeveral cases of alkali-silica reaction involving granitic aggregates have been diagnosed in damaged concrete structures in Portugal. Nonetheless, this kind of rock is usually regarded as slow/late reactive or even non-reactive to alkalis. Granitic rocks are widely exploited in Northern and Central Portugal, representing almost half of the produced aggregates in this country. Project IMPROVE rose from the need to accurately diagnose the potential reactivity of granites to alkalis. The study involved about forty granites collected from different regions in Portugal, from which the results of eight samples are being presented in this paper. The tests carried out include the petrographic analyses of the aggregates and mortar and concrete expansion tests. It was concluded that the content of microcrystalline quartz correlates better with the results of AAR-4.1 than with the other expansion tests.Keywords: alkali-silica reaction; granites; petrography; expansion tests; performance.Diversos casos de reação álcalis-sílica têm sido diagnosticados em estruturas de concreto nas quais foram utilizadas rochas graníticas. No entanto, este tipo de rocha é geralmente considerado como inócuo ou de reactividade pouco provável aos álcalis. As rochas graníticas são amplamente exploradas no norte e centro de Portugal, representando quase metade da produção total de agregados no país. O Projeto IMPROVE surgiu da necessidade de diagnosticar corretamente a potencial reatividade aos álcalis de granitos. No âmbito desse projeto foram estudadas diversas amostras colhidas em diferentes regiões de Portugal, apresentando-se neste artigo os resultados de oito destas. Os ensaios realizados incluem a caracterização petrográfica dos agregados e ensaios de expansão de barra de argamassa e prisma de concreto. Concluiu-se que o conteúdo em quartzo microcristalino se correlaciona melhor com os resultados do ensaio em prisma de concreto RILEM AAR-4.1 do que com os outros ensaios de expansão.Palavras-chave: reação álcalis-sílica, granito, petrografia, ensaios de expansão, desempenho.