The necessary sequence of stages has been developed and the unmanned technology for creating a digital elevation model by the example of the land use of Novosibirsk region has been implemented. The technology consists of a set of stages: reconnaissance of the terrain, fi xing reference signs, satellite measurements, aerial photography fl ights, processing the results of aerial photography and the construction of digital elevation model. The technological process was signifi cantly affected by unfavorable weather conditions - low clouds, gusty wind, high air humidity. Remote sensing study with the use of unmanned aerial vehicle of the Supercam S 250 F type made it possible to create a large-scale orthophotoplan and a digital elevation model on the farm territory (M 1 : 1000). For photogrammetric processing of digital data obtained on the farm, a two-stage method of satellite determination was used. The essence of this method was to obtain a large number of satellite measurements in a static mode and further statistical processing. For statistical processing of satellite measurements, information was used on the coordinate location of two base ground stations of the Novosibirsk Region satellite network - Kochenevo and Novosibirsk. Remoteness of support points from the ground satellite station of Novosibirsk was at a distance of over 90 km. As a result of equalization calculations, the obtained average square displacement errors of the planned and high-altitude position of the support points in various test sites were under 0.02 m in the plan, and under 0.03 m by height. In the process of photogrammetric processing of the results of aerial photography with the use of unmanned aerial vehicle, the tasks of transferring the position of points on a digital image in the pixel coordinate system into the coordinate system of the area, building digital irregular (TIN, Triangulated Irregular Network) and regular (DEM, Digital Elevation Model) surface models, and based on them, textured terrain models (TTM, Textured Terrain Model) and orthophotoplans, were solved.