Combustion characteristics and NOx emissions of propane and air mixture in a channel with a bluff body were investigated experimentally. Effects of the angle and type of the flameholder on the NOx emissions, blow-off limit, combustion efficiency, and exhaust gas temperature were examined. The results show that the NOx emissions are dependent on flameholder type and angle. Also it was observed that the perforated V-gutters considerably increases the blow-off performance. Moreover, the blow-off limit decreases as the geometrical size of flame-holder is increased. In addition, the combustion efficiency increase first and then decrease with the increase of the angle. The physics of the combustion process behind V-gutter flameholdes has been discussed. On the basis of experiment authors presented a modified version of the formula for calculation of lean blow-off limits when using bluff bodies, such as V-gutter flameholders.

Blow-off performance and NO x emissions of the propane and air mixture in a rectangular combustion chamber with bluff bodies were investigated experimentally and numerically. The effects of distance between bluff bodies on NO x emissions, the blow-off limit, and exhaust gas temperature were examined. It was observed that NO x emissions are highly dependent on distance between V-gutters. The re-circulation zone behind the bluff body expands in width based on the decrease of distance between V-gutters, and expands in length with the increase of inlet velocity. The temperature fields behind the bluff body show a similar change, the temperature behind the bluff body reaches its highest when the distance between V-gutters reaches 20 mm, meaning it has better flame stability. The blow-off limit is significantly improved with the decrease of distance between V-gutters. The blow-off limit is greatly improved by reducing the distance between the V-gutters. Maximum blow-off limit of 0.

No abstract

For 30 years research has been carried out on the use of wastewater from thermal power plants and industrial boilers, as well as on the use and extraction of various components from flue gases such as carbon dioxide, sulfur and nitrogen. Technological solutions were developed and implemented in various productions at various times: use of acid-forming components of flue gases for the regeneration of cation exchangers; carbon dioxide from flue gases of 99.9% purity with “food” quality; technical nitrogen of 95-99 purity from flue gases; wastewater usage to increase the degree of sulfur oxides from flue gases. The article presents a technological solution for the integrated utilization of flue gases and wastewater from a thermal power plant with high-pressure boilers burning solid fuels.

No abstract