In the last years, there is an increasing acknowledgment of our impact on the environment due to our lifestyle, while the need to adopt a more sustainable approach as to our consumption habits emerges as of particular significance. This trend regards industrial sectors affecting the consumption habits and, especially, electronic industry where the short life cycles and the rapidly developing technology have led to increased e-waste volumes, such as discarded electronic equipment. Waste Electric and Electronic Product or E-waste is referred to all kind of electric and electronic equipments and appliances that is thrown by users. The majority of such elements result in landfills because it is inexpensive disposal option. The E-waste has become a matter of concern because of toxic and hazardous present in electronic goods and if not properly managed. This equipments are a complicated assembly of thousand material, many of which one highly toxic such as brominates substances, toxic gases, toxic metals, biologically active material, acids, plastics and plastics additives. However, their partial recyclability, due to their material composition along with the unavoidable restrictions in landfills, has led to the development of retrieval techniques for their recycling and re-use, highlighting the significance of e-waste recycling, not only from a waste management aspect but also from a valuable materials' retrieval aspect. This paper provides an overview of E-waste generation and management in Malaysia, which, with rapid economic growth and urbanization, is becoming a major social and environmental issue. Thus, major concern for E-waste management in Malaysia has addressed to environmental protection, compared to quantity control. The challenge now is to make the practice effectively in the many different contexts in Malaysia.

No abstract

Malaysia as a developing country favor energy demand by years which created mainly from fossil fuel. Unfortunately, the action leads to significant increment in carbon dioxide (CO 2) emission that causing the global warming. The most promising mitigation strategy is by deploying Carbon Capture and Storage (CCS) technology where mineral carbonation was identified as the safest method for permanent storage and does not require continuous monitoring. Accordingly, National Green Technology was launched in 2009 to support the growth of green technology development in Malaysia as a carbon mitigation strategy. Thus, this paper aims to propose the development of a conceptual eco-design for Low Energy Mechanical Milling (LEMM). The concept was proposed by using the Quality Function Deployment (QFD) tool with combination of sustainability determinants (DFS) namely economic, environmental and social which evaluated using Solidworks 2015 sustainability assessment. The results show the new product targets for LEMM in prior on energy consumption (MJ), selling price (MYR), material cost (MYR), carbon footprint (kg CO 2) with weightage of 5.2, 4.2, 3.6 and 3.6 respectively. The implementation of DFS criteria into the QFD promote to reduce material used by 16%, 35% reduction of carbon footprint, 28% less energy consumption, 28% lower air acidification, 77% of water eutrophication declined and increased recyclability by 15%.

Carbon dioxide (CO2) is one of the greenhouse gases (GHG) and the concentration is much more higher than other GHG gases. Based on the prediction, about 285.73 million tonnes will be emitted in year 2020 with the main contributors are from power generation, manufacturing industries, transportation and residential sector [1]. This research focused to study the effect of pressure on the CO2 absorption with Malaysia steel slag using mechanical stirrer. The steel slag is collected from one of steel industry located in Pasir Gudang Johor Malaysia and characterized to investigated the chemical composition. The reaction between CO2 absorption and the slag was investigated by using different speed and weight. The initial pressure was set at 101.3 kPa which equivalent with 1 atmospheric pressure. The behavior of the reaction between CO2, and ground sample was investigated by measuring the change in the CO2 pressure inside the mechanical stirrer. It was found that the CO2 pressure decreased as soon as the stirrer started and continuously decreased till bout 270 t/min stirring time.

No abstract