No abstract

Thermoelectric materials, capable of interconverting heat and electricity, are attractive for applications in thermal energy harvesting as a means to power wireless sensors, wearable devices, and portable electronics. However, traditional inorganic thermoelectric materials pose significant challenges due to high cost, toxicity, scarcity, and brittleness, particularly when it comes to applications requiring flexibility. Here, we investigate organic–inorganic nanocomposites that have been developed from bespoke inks which are printed via an aerosol jet printing method onto flexible substrates. For this purpose, a novel in situ aerosol mixing method has been developed to ensure uniform distribution of Bi2Te3/Sb2Te3 nanocrystals, fabricated by a scalable solvothermal synthesis method, within a poly(3,4-ethylenedioxythiophene) polystyrene sulfonate matrix. The thermoelectric properties of the resulting printed nanocomposite structures have been evaluated as a function of composition, and the power factor was found to be maximum (∼30 μW/mK2) for a nominal loading fraction of 85 wt % Sb2Te3 nanoflakes. Importantly, the printed nanocomposites were found to be stable and robust upon repeated flexing to curvatures up to 300 m–1, making these hybrid materials particularly suitable for flexible thermoelectric applications.

Very high surface area, self-assembled, highly crystalline mesoporous SrTiO (STO) thin films were developed for photoelectrochemical water splitting. Much improved performance of these mesoporous films compared to planar STO thin films and any other form of STO such as single crystal samples and nanostructures was demonstrated. The high performance resulted from very large surface area films and optimization of carrier concentration.

Ferroelectric polarization is an intriguing physical phenomenon for tuning charge-transport properties and finds application in a wide range of optoelectronic devices. So far, ferroelectric materials in a planar geometry or chemically grown nanostructures have been used. However, these structural architectures possess serious disadvantages such as small surface areas and structural defects, respectively, leading to reduced performance. Herein, the growth of room-temperature ferroelectric nanoporous/nanocolumnar structure of Ag,Nb-codoped SrTiO 3 (Ag/Nb:STO) using pulsed laser deposition is reported and demonstrated to have enhanced photoelectrochemical (PEC) properties using ferroelectric polarization. By manipulating the external electrical bias, ∼3fold enhancement in the photocurrent from 40 to 130 μA•cm −2 of film area is obtained. Concurrently, the flat-band potential is decreased from −0.55 to −1.13 V, revealing a giant ferroelectric tuning of the band alignment at the semiconductor surface and enhanced charge transfer. In addition, an electrochemical impedance spectroscopy study confirmed the tuning of the charge transfer with ferroelectric polarization. Our nanoporous ferroelectric-semiconductor approach offers a new platform with great potential for achieving highly efficient PEC devices for renewable energy applications.

Aerosol-jet printing allows functional materials to be printed from inks with a wide range of viscosities and constituent particle sizes onto various substrates, including the printing of organic thermoelectric materials on flexible substrates for low-grade thermal energy harvesting. However, these materials typically suffer from relatively poor thermoelectric performance, compared to traditional inorganic counterparts, due to their low Seebeck coefficient, S, and electrical conductivity, σ. Here, we demonstrate a modified aerosol-jet printing technique that can simultaneously incorporate well-dispersed high-S Sb2Te3 nanoflakes and high-σ multi-walled carbon nanotubes (MWCNTs) providing good inter-particle connectivity to significantly enhance the thermoelectric performance of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate structures on flexible polyimide substrates. A nominal loading fraction of 85 wt. % yielded a power factor of ∼41 μW/mK2, which is among the highest for printed organic-based structures. Rigorous flexing and fatigue tests were performed to confirm the robustness and stability of these aerosol-jet printed MWCNT-based thermoelectric nanocomposites.