Many unit operations required in microfluidics can be realised by electrokinetic phenomena. Electrokinetic phenomena are related to the presence of electrical surface charges of microfluidic substrates in contact with a liquid. As surface charges cannot be directly measured, the zeta potential is considered as the relevant parameter instead. PMMA is an attractive microfluidic substrate since micron-sized features can be manufactured at low costs. However, the existence of PMMA surface charges is not well understood and the zeta potential data found in the literature show significant disagreement. In this article, we present a thorough investigation on the zeta potential of PMMA. We use computations of the potential distribution in the electrical double layer to predict the influence of various electrolyte parameters. The generated knowledge is compared to extensive experiments where we investigate the influence of ionic strength, pH, temperature and the nature of the electrolyte. Our findings imply that two different mechanisms influence the zeta potential depending on the pH value. We propose pure shielding in the acidic and neutral milieus while adsorption of co-ions occurs along with shielding in the alkaline milieu.

Electrokinetic phenomena play an important role in the electrical characterization of surfaces. In terms of planar or porous substrates, streaming potential and/or streaming current measurements can be used to determine the zeta potential of the substrates in contact with aqueous electrolytes. In this work, we perform electrical impedance spectroscopy measurements to infer the electrical resistance in a microchannel with the same conditions as for a streaming potential experiment. Novel correlations are derived to relate the streaming current and streaming potential to the Reynolds number of the channel flow. Our results not only quantify the influence of surface conductivity, and here especially the contribution of the stagnant layer, but also reveal that channel resistance and therefore zeta potential are influenced by the flow in the case of low ionic strengths. We conclude that convection can have a significant impact on the electrical double layer configuration which is reflected by changes in the surfaces conductivity.