We introduce a new approach by using hexagonal synthetic aperture in an optical system and obtaining a high-resolution image. This paper illustrates two cases of an optical system with a hexagonal synthetic aperture where the study was included, First, study the effect of a hexagonal synthetic aperture on a diffraction-bound optical system, Second, study the effect of hexagonal synthetic aperture on an optical system with a focal error of 25λ and 50λ. The results showed a significant improvement in the central intensity, a clear decrease in the secondary peaks, and a decrease in the width of the central intensity curve, which gives a high-resolution image as a result of improving the signal to noise ratio.

Liquid zinc acetate nanoparticles were added to a fluorescent organic dye (fluorescein sodium) to prepare three concentrations (2 × 10-5, 7×10-5, 1×10-4) moI/L, and the absorbance of the dye was measured before and after adding Liquid nanomaterial by using two devices (SCINCO Mega-2100 UV/visible Spectrophotometer.) as well as measuring the flux of the dye before and after adding zinc acetate nanoparticles using the (Spectrofluorometer F96 PRO). The Stoke displacement (Δη), the radiative age (τfm), the fluorescence lifetime (τf), and the quantitative efficiency (Qfm) were calculated. Absorption and fluorescence curves were drawn using the Excel program. The MATLAB program was also used to measure the area under the absorption and fluorescence spectra curves. It was found that the fluorescence intensity of fluorescein sodium dye has increased compared to the intensity of fluorescence before adding the nanomaterial and thus increasing the quantitative efficiency, which in turn helps in improving the performance of the photovoltaic concentrator, resulting in an improvement in the efficiency of the solar cell.

No abstract

It is well established that synthetic apertures of various shapes are superior to a single aperture in improving the overall performance of optical systems. In this research, a set of elliptical synthetic obstructed apertures was used in place of the ellipse synthetic obstructed apertures that was used previously and the calculation of the point spread function to assess the performance of the optical system and reduce the diffraction values from it previously, according to the results, an improvement was observed in the optical system with array of elliptical synthetic obstructed apertures.