The pseudopotential lattice Boltzmann model (PP-LBM) is a very popular model for simulating multiphase systems. In this model, phase separation occurs via a short-range attraction between different phases when the interaction potential term is properly chosen. Therefore, the potential term is expected to play a significant role in the model and to affect the accuracy and the stability of the computations. The original PP-LBM suffers from some drawbacks such as being capable of dealing with low density ratios only, thermodynamic inconsistency, and spurious velocities. In this paper, we aim to analyze the PP-LBM with the view to simulate single-component (non-)isothermal multiphase systems at large density ratios and in spite of the presence of spurious velocities. For this purpose, the performance of two popular potential terms and of various implementation schemes for these potential terms is examined. Furthermore, the effects of different parameters (i.e., equation of state, viscosity, etc.) on the simulations are evaluated, and, finally, recommendations for a proper simulation of (non-)isothermal multiphase systems are presented.

No abstract

AbstractThe most severe limitation of the standard Lattice Boltzmann Method is the use of uniform Cartesian grids especially when there is a need for high resolutions near the body or the walls. Among the recent advances in lattice Boltzmann research to handle complex geometries, a particularly remarkable option is represented by changing the solution procedure from the original “stream and collide” to a finite volume technique. However, most of the presented schemes have stability problems. This paper presents a stable and accurate finite-volume lattice Boltzmann formulation based on a cell-centred scheme. To enhance stability, upwind second order pressure biasing factors are used as flux correctors on a D2Q9 lattice. The resulting model has been tested against a uniform flow past a cylinder and typical free shear flow problems at low and moderate Reynolds numbers: boundary layer, mixing layer and plane jet flows. The numerical results show a very good accuracy and agreement with the exact solution of the Navier-Stokes equation and previous numerical results and/or experimental data. Results in self-similar coordinates are also investigated and show that the time-averaged statistics for velocity and vorticity express self-similarity at low Reynolds numbers. Furthermore, the scheme is applied to simulate the flow around circular cylinder and the Reynolds number range is chosen in such a way that the flow is time dependent. The agreement of the numerical results with previous results is satisfactory.

Various curved no-slip boundary conditions available in literature improve the accuracy of lattice Boltzmann simulations compared to the traditional staircase approximation of curved geometries. Usually, the required unknown distribution functions emerging from the solid nodes are computed based on the known distribution functions using interpolation or extrapolation schemes. On using such curved boundary schemes, there will be mass loss or gain at each time step during the simulations, especially apparent at high Reynolds numbers, which is called mass leakage. Such an issue becomes severe in periodic flows, where the mass leakage accumulation would affect the computed flow fields over time. In this paper, we examine mass leakage of the most well-known curved boundary treatments for high-Reynolds-number flows. Apart from the existing schemes, we also test different forced mass conservation schemes and a constant density scheme. The capability of each scheme is investigated and, finally, recommendations for choosing a proper boundary condition scheme are given for stable and accurate simulations.

This paper deals with the simulation of water entry problems using the lattice Boltzmann method (LBM). The dynamics of the free surface is treated through the mass and momentum fluxes across the interface cells. A bounce-back boundary condition is utilized to model the contact between the fluid and the moving object. The method is implemented for the analysis of a two-dimensional flow physics produced by a symmetric wedge entering vertically a weakly-compressible fluid at a constant velocity. The method is used to predict the wetted length, the height of water pile-up, the pressure distribution and the overall force on the wedge. The accuracy of the numerical results is demonstrated through comparisons with data reported in the literature.