The synthetic routes and materials properties of polypropylene/montmorillonite nanocomposites are reviewed. The nanocomposite formation is achieved in two ways: either by using functionalized polypropylenes and common organo-montmorillonites, or by using neat/ unmodified polypropylene and a semi-fluorinated organic modification for the silicates. All the hybrids can be formed by solventless melt-intercalation or extrusion, and the resulting polymer/inorganic structures are characterized by a coexistence of intercalated and exfoliated montmorillonite layers. Small additionsstypically less than 6 wt %sof these nanoscale inorganic fillers promote concurrently several of the polypropylene materials properties, including improved tensile characteristics, higher heat deflection temperature, retained optical clarity, high barrier properties, better scratch resistance, and increased flame retardancy.

The main theme here is to fabricate PLA (poly lactic-acid)/CDHA (carbonated calcium deficient hydroxyapatite) bionanocomposites, where both the constituents are biocompatible and biodegradable with one dimension in nanometer scale. Such materials are important in tissue engineering applications. The bionanocomposite fibers were fabricated via electrospinning. There are two important signatures of this paper. First, CDHA, rather than HA, is added to PLA as the second phase. As opposed to HA, CDHA mimics the bone mineral composition better and is biodegradable. Therefore, PLA/CDHA fibers should have better biodegradability while maintaining a physiological pH during degradation. To the best of our knowledge, this is the first attempt of electrospinning of such a composite. Second, the CDHA nanoparticles were synthesized using the benign low temperature biomimetic technique, the only route available for the retention of carbonate ions in the HA lattice. The structural properties, degradation behavior, bioactivity, cell adhesion, and growth capability of as-fabricated PLA/CDHA bionanocomposites were investigated. The results show that the incorporation of CDHA decreased PLA fiber diameters, accelerated PLA degradation, buffered pH decrease caused by PLA degradation, improved the bioactivity and biocompatibility of the scaffold. These results prove that PLA/CDHA bionanocomposites have the potential in tissue regeneration applications.

Halloysite nanotubes (HNT) reinforced polylactic acid (PLA) nanocomposite fibers were produced using an electrospinning approach for biomedical applications. The PLA/HNT nanocomposite fibers were characterized using x-ray diffraction (XRD) and scanning electron microscopy (SEM). The various factors such as type of solvent, solution concentration, HNT loading and feed rate, affecting the electrospinning process, and the morphology of the nanofibers were investigated, and the optimum values for these parameters are suggested. The results indicated that the addition of dimethylformamide (DMF) to chloroform facilitated the electrospinning process because of the improvement in electrical conductivity and viscosity of the solution. Nanometer-sized fibers were obtained by the addition of HNT to PLA. HNT loadings had a significant effect on the morphology of the nanofibers. Bead-free fibers were produced at feed rates between 1 and 4 mL/h.

No abstract