We report a synthesis of lithium sulfide, the cost-determining material for making sulphide solid electrolytes (SSEs), via spontaneous metathesis reactions between lithium salts (halides and nitrate) and sodium sulfide. This...

Li 6 PS 5 Cl is an extensively studied sulfide-solidelectrolyte for developing all-solid-state lithium batteries. However, its practical application is hindered by the high cost of its raw material lithium sulfide (Li 2 S), the difficulty in its massive production, and its substandard performance. Herein we report an economically viable and scalable method, denoted as "de novo liquid phase method", which enables in synthesizing highperformance Li 6 PS 5 Cl without using commercial Li 2 S but instead in situ making Li 2 S from cheap materials of lithium chloride (LiCl) and sodium sulfide. LiCl, a raw material needed for making both Li 2 S and Li 6 PS 5 Cl, can be added at a full-scale in the beginning and unrequired to separate when making the intermediate Li 3 PS 4 . Such a consecutive feature makes this method time-efficient; and the excess amount of LiCl in the step of making Li 2 S also facilitates removing the byproduct of sodium chloride via the common ion effect. The materials cost of this method for Li 6 PS 5 Cl is ∼ $55/kg, comparable with the practical need of $50/kg. Moreover, the obtained Li 6 PS 5 Cl shows high ionic conductivity and outstanding cyclability in full battery tests, that is, ∼2 mS/cm and >99.8% retention for 400+ cycles at 1 C, respectively. Thus, this innovative method is expected to pave the way to develop practical sulfide-solid-electrolytes for all-solid-state lithium batteries.

The element of Li is one of the critical materials for the modern society, for instance, its most famous application in ubiquitous Li-ion batteries (LIBs). Furthermore, its pure form of...

For some future clean-energy technologies (such as advanced batteries), the concept of green chemistry has not been exercised enough for their material synthesis. Herein, we report a waste-free method of synthesizing lithium sulfide (Li 2 S), a critical material for both lithium−sulfur batteries and sulfide-electrolytebased all-solid-state lithium batteries. The key novelty lies in directly precipitating crystalline Li 2 S out of an organic solution after the metathetic reaction between a lithium salt and sodium sulfide. Compared with conventional methods, this method is advantageous in operating at ambient temperatures, releasing no hazardous wastes, and being economically more competitive. To collect the valuable byproduct out of the liquid phases, a "solventing-out crystallization" technique is employed by adding an antisolvent (AS) of low boiling point. The subsequent distillation of the new solution under vacuum evaporates off the AS rather than the highboiling-point reaction solvent (RS), saving a lot of energy. Consequently, the separated AS and RS containing the unreacted lithium salt can be directly reused. For industrial production, the entire process may be operated continuously in a closed loop without discharging any wastes. Moreover, Li 2 S cathodes and sulfide-electrolyte Li 6 PS 5 Cl derived from the synthesized Li 2 S show impressive battery performance, displaying the great potential of this method for practical applications.

In the field of lithium–sulfur batteries (LSBs) and all-solid-state batteries, lithium sulfide (Li2S) is a critical raw material. However, its practical application is greatly hindered by its high price due to its deliquescent property and production at high temperatures (above 700 °C) with carbon emission. Hereby, we report a new method of preparing Li2S, in air and at low temperatures (∼200 °C), which presents enriched and surprising chemistry. The synthesis relies on the solid-state reaction between inexpensive and air-stable raw materials of lithium hydroxide (LiOH) and sulfur (S), where lithium sulfite (Li2SO3), lithium thiosulfate (Li2S2O3), and water are three major byproducts. About 57% of lithium from LiOH is converted into Li2S, corresponding to a material cost of ∼$64.9/kg_Li2S, less than 10% of the commercial price. The success of conducting this water-producing reaction in air lies in three-fold: (1) Li2S is stable with oxygen below 220 °C; (2) the use of excess S can prevent Li2S from water attack, by forming lithium polysulfides (Li2S n ); and (3) the byproduct water can be expelled out of the reaction system by the carrier gas and also absorbed by LiOH to form LiOH·H2O. Two interesting and beneficial phenomena, i.e., the anti-hydrolysis of Li2S n and the decomposition of Li2S2O3 to recover Li2S, are explained with density functional theory computations. Furthermore, our homemade Li2S (h-Li2S) is at least comparable with the commercial Li2S (c-Li2S), when being tested as cathode materials for LSBs.