Renewable sources like solar PV arrays are generally operated at low voltages due to safety issues. For applications such as grid connected systems, it requires boosting to high voltage which leads to reduction in efficiency. To solve this, a new high gain and efficient boost converter which is a combination of buffer capacitor, passive clamp recovery circuit to restore leakage energy in coupled inductor is presented. The magnetic field of the linked inductor stores the energy obtained from the supply. A passive clamp network recovers the energy that is stored in the leakage inductance, enhances the gain of voltage and improves overall system efficiency. High duty ratios are not essential to achieve higher voltage gain, hence the reverse recovery problem of diode is prevented. Moreover, passive clamp network decreases the voltage stress of switch, thus a minimum rating switch be used, as a result, the system's total efficiency improves. This converter output is fed as input to a single phase full bridge inverter and also synchronized to a single phase grid by using d-q axis current controller. The performance and powers injected are analyzed by connecting a resistive load.

<div align="left"><span>The grid interconnected application systems require high voltage levels which leads to an efficiency reduction. To overcome this, a new high gain boost converter in association with buffer capacitor, passive clamp recovery circuit to restore leakage energy in coupled inductor is presented. The magnetic field of the linked inductor stores the energy obtained from the supply. The energy is transmitted to the connected load for consumption in further operating modes. A passive clamp network recovers the energy that is stored in the leakage inductance, enhances the gain of voltage, and improves overall system efficiency. The essential feature of this converter is that, high duty ratios are not required to achieve higher voltage gain, hence the reverse recovery problem of the diode is prevented. Moreover, a passive clamp network decreases the voltage stress of the switch, thus a minimum rating switch is used, as a result, the system's total efficiency improves. This converter output is fed as input to a single-phase full-bridge inverter and also synchronized to a single-phase grid. The performance and powers injected are analyzed by connecting a resistive load. </span></div>