No abstract

Aqra Anticline is a double plunging anticline, oriented NW–SE with a steep southwestern limb and even overturned. Geomorphological features are interpreted using satellite images, as a result, it was found that the anticline shows clear geomorphological and structural features which indicate the lateral growth of the anticline. Among those features are water gaps, wind gaps, forked-shaped valleys, curved valleys, inclined valleys and dislocated and abandoned alluvial fans. Some of the vague interpreted features were checked and confirmed in the field.

No abstract

The main lithological composition of different formations in the Iraqi Kurdistan Region is the carbonate rocks; some of those rocks are suitable for cement production; such as Qamchuqa Bekhme, Sinjar, Pila Spi and Anah formations. However, the six existing cement plants in are using limestone beds, five of those plants are using limestone from the Sinjar Formation, and one plant is using limestone from the Anah Formation. Recently, performed research works confirmed that the limestone beds within the Qamchuqa, Bekhme and Pila Spi formations are very suitable for cement production. The current research work deals with studying the exposed limestone beds within the Bekhme Formation at Hareer Mountain in the central part of IKR to check their suitability for the cement industry. Accordingly, we collected 12 rock samples from a section within the Bekhme Formation at an almost constant sampling interval (5 m); however, for two samples the sampling interval was 6 and 8 m (sample No. 2 and 12, respectively). Each sample represents a channel sample for the concerned sampling interval to be representative for the thickness of the sampled interval. The total thickness of the sampled section is 64 m with a covered interval of 30 m, totaling up to 94 m. The collected 12 samples were prepared at the laboratory of the University of Kurdistan Hewler and were subjected to XRF test at Mass Cement Plant (Sulaimaniyah) to check the concentration of certain oxides that are used in the Iraqi Standard for cement production. The acquired concentrations of the main oxides (CaO, MgO, Al2O3, Fe2O3, Na2O, K2O, SO3), and Cl and L.O.I. at each sample were changed to weighted averages and the results were compared with the Iraqi standards for cement industry. The result was the sampled rocks are excellent for cement production.