Plasmonic hot carriers have been recently identified as key elements for photocatalysis at visible wavelengths. The possibility to transfer energy between metal plasmonic nanoparticles and nearby molecules depends not only on carrier generation and collection efficiencies but also on their energy at the metal−molecule interface.Here an energy screening study was performed by monitoring the aniline electro-polymerization reaction via an illuminated 80 nm gold nanoparticle. Our results show that plasmon excitation reduces the energy required to start the polymerization reaction as much as 0.24 eV. Three possible photocatalytic mechanisms were explored: the enhanced near field of the illuminated particle, the temperature increase at the metal−liquid interface, and the excited electron−hole pairs. This last phenomenon is found to be the one contributing most prominently to the observed energy reduction.

Research on optically resonant dielectric nanostructures has accelerated the development of photonic applications, driven by their ability to strongly confine light on the nanoscale. However, as dielectric resonators are typically operated below their band gap to minimize optical losses, the usage of dielectric nanoantenna concepts for absorption enhancement has largely remained unexplored. In this work, we realize engineered nanoantennas composed of photocatalytic dielectrics and demonstrate increased light-harvesting capabilities in otherwise weakly absorptive spectral regions. In particular, we employ anapole excitations, which are known for their strong light confinement, in nanodisks of oxygen-vacancyrich TiO 2−x , a prominent photocatalyst that provides a powerful platform for exploring concepts in absorption enhancement in tunable nanostructures. The arising photocatalytic effect is monitored on the single particle level using the well-established photocatalytic silver reduction reaction on TiO 2 . With the freedom of changing the optical properties of TiO 2 through tuning the abundance of V O states, we discuss the interplay between cavity damping and the anapole-assisted field confinement for absorption enhancement. This concept is general and can be extended to other catalytic materials with higher refractive indices.

We investigate titanium nitride (TiN) thin film coatings on silicon for CMOS-compatible sub-bandgap charge separation upon incident illumination, which is a key feature in the vast field of on-chip photodetection and related integrated photonic devices. Titanium nitride of tunable oxidation distributions serves as an adjustable broadband light absorber with high mechanical robustness and strong chemical resistivity. Backside-illuminated TiN on p-type Si (pSi) constitutes a self-powered and refractory alternative for photodetection, providing a photoresponsivity of about ∼1 mA/W at 1250 nm and zero bias while outperforming conventional metal coatings such as gold (Au). Our study discloses that the enhanced photoresponse of TiN/pSi in the near-infrared spectral range is directly linked to trap states in an ultrathin TiO2–x interfacial interlayer that forms between TiN and Si. We show that a pSi substrate in conjunction with a few nanometer thick amorphous TiO2–x film can serve as a platform for photocurrent enhancement of various other metals such as Au and Ti. Moreover, the photoresponse of Au on a TiO2–x /pSi platform can be increased to about 4 mA/W under 0.45 V reverse bias at 1250 nm, allowing for controlled photoswitching. A clear deviation from the typically assumed Fowler-like response is observed, and an alternative mechanism is proposed to account for the metal/semiconductor TiO2–x interlayer, capable of facilitating hole transport.

Commercially available metal inks are mainly designed for planar substrates (for example, polyethylene terephthalate foils or ceramics), and they contain hydrophobic polymer binders that fill the pores in fabrics when printed, thus resulting in hydrophobic electrodes. Here, a low-cost binder-free method for the metallization of woven and nonwoven fabrics is presented that preserves the 3D structure and hydrophilicity of the substrate. Metals such as Au, Ag, and Pt are grown autocatalytically, using metal salts, inside the fibrous network of fabrics at room temperature in a two-step process, with a water-based silicon particle ink acting as precursor. Using this method, (patterned) metallized fabrics are being enabled to be produced with low electrical resistance (less than 3.5 Ω sq −1 ). In addition to fabrics, the method is also compatible with other 3D hydrophilic substrates such as nitrocellulose membranes. The versatility of this method is demonstrated by producing coil antennas for wireless energy harvesting, Ag-Zn batteries for energy storage, electrochemical biosensors for the detection of DNA/proteins, and as a substrate for optical sensing by surface enhanced Raman spectroscopy. In the future, this method of metallization may pave the way for new classes of high-performance devices using low-cost fabrics.

Nanoscopic inspection of reactivity in single plasmonic photocatalysts.