A macroscopic compression test utilizing a simple custom-built instrument was employed to measure polydimethylsiloxane (PDMS) elastic modulus. PDMS samples with varying crosslinking density were prepared with the elastomer base to the curing agent ratio ranging from 5 : 1 to 33 : 1. The PDMS network elastic modulus varied linearly with the amount of crosslinker, ranging from 0.57 MPa to 3.7 MPa for the samples tested. PDMS elastic modulus in MPa can be expressed as 20 MPa/PDMS base to curing agent ratio. This article describes a simple method for measuring elastic properties of soft polymeric materials.

No abstract

No abstract

No abstract

Corrosion product formed on zinc sample during 2 weeks immersion in saline solution has been investigated. The corrosion layer morphology as well as its chemical composition, was analyzed using scanning electron microscopy (SEM), x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Electrochemical measurement was used to analyze the corrosion behavior. Zinc oxide, zinc hydroxide and zinc hydroxide chloride were formed on zinc surface in saline solution. The thickness of corrosion layer increased with the time increased. The pure Zn has an estimated corrosion rate of 0.063 mm y−1 after immersion for 336 h. Probable mechanisms of zinc corrosion products formation are presented.