The cyclic response of steel beam-to-column connections under a cyclic sinusoidal loading history was studied. The experimental investigation included two full-scale specimens having a cross section of IPE240 and a height of 1.0m. This part of the specimen was rigidly connected to a much stiffer steel beam thus representing a steel beam-to-column connection under investigation. These specimens were tested to failure being subjected to a cyclic sinusoidal point load of continuously increasing amplitude that produced a similarly varying bending moment at the steel beam-to-column connection. Instrumentation was provided to record both the applied moment as well as the deformation of the specimen in the region of the connection in terms of plastic hinge rotation. Each specimen experienced yielding and plastic rotation in this region that resulted initially in a plastic stable response till the final damage, which occurred either in the form of local instability of the flanges or fracture. The response of this beam-to-column connection was numerically simulated employing commercial software that tried to reproduce all the stages of the observed non-linear response. By comparing the numerical predictions with the measured response the success of the employed numerical simulation could be examined. The employed numerical simulation could yield realistic predictions of the limit state local buckling of the flanges of the used IPE 240 cross section as well as good agreement with the observed measured response, in terms of flexural capacity, energy dissipation and deterioration characteristics, provided that the material model in this numerical simulation was equipped with the "proper" parameters.

No abstract

Abstract. This paper presents results from an experimental and numerical investigation that was initiated from the failure of a complex scaffolding 3-D frame that was

Abstract. The cyclic response of steel beam-to-column connections under a cyclic sinusoidal loading history was studied. The experimental investigation included a number of full-

COMPDYN 2019 7 th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering M. Papadrakakis, M. Fragiadakis (eds.