No abstract

Three-dimensional (3D) measurement of non-collaborative surfaces is still an open research topic. This paper investigates and quantifies for the first time the effect of light directionality and fusion of multiple images as a method to improve the quality of photogrammetric 3D reconstruction. For this aim, an image acquisition system that employs multiple light sources was developed to highlight the roughness and microstructures of the object under investigation. Images were captured at various grazing angles to highlight the local surface roughness and microstructures. Individual point clouds, created using images taken at different grazing angles, were produced using dense image-matching techniques. These point clouds were then compared against different 3D photogrammetric reconstructions obtained from a pre-processing of the acquired images based on diffuse lighting, median and average images. Experiments showed that exploiting light directionality significantly improves image-matching quality. Furthermore, depending on the light direction, the root mean square (RMS) error of the 3D surfaces obtained using the proposed system were up to 50% less than those created by traditional diffuse lighting.

In the current modern era of information and technology, emerging remote advancements have been widely established for detailed virtual inspections and assessments of infrastructure assets, especially bridges. These technologies are capable of creating an accurate digital representation of the existing assets, commonly known as the digital twins. Digital twins are suitable alternatives to in-person and on-site based assessments that can provide safer, cheaper, more reliable, and less distributive bridge inspections. In the case of bridge monitoring, Unmanned Aerial Vehicle (UAV) photogrammetry and Terrestrial Laser Scanning (TLS) are among the most common advanced technologies that hold the potential to provide qualitative digital models; however, the research is still lacking a reliable methodology to evaluate the generated point clouds in terms of quality and geometric accuracy for a bridge size case study. Therefore, this paper aims to provide a comprehensive methodology along with a thorough bridge case study to evaluate two digital point clouds developed from an existing Australian heritage bridge via both UAV-based photogrammetry and TLS. In this regard, a range of proposed approaches were employed to compare point clouds in terms of points’ distribution, level of outlier noise, data completeness, surface deviation, and geometric accuracy. The comparative results of this case study not only proved the capability and applicability of the proposed methodology and approaches in evaluating these two voluminous point clouds, but they also exhibited a higher level of point density and more acceptable agreements with as-is measurements in TLS-based point clouds subjected to the implementation of a precise data capture and a 3D reconstruction model.

Abstract. 3D digital reconstruction techniques are extensively used for quality control purposes. Among them, photogrammetry and photometric stereo methods have been for a long time used with success in several application fields. However, generating highly-detailed and reliable micro-measurements of non-collaborative surfaces is still an open issue. In these cases, photogrammetry can provide accurate low-frequency 3D information, whereas it struggles to extract reliable high-frequency details. Conversely, photometric stereo can recover a very detailed surface topography, although global surface deformation is often present. In this paper, we present the preliminary results of an ongoing project aiming to combine photogrammetry and photometric stereo in a synergetic fusion of the two techniques. Particularly, hereafter, we introduce the main concept design behind an image acquisition system we developed to capture images from different positions and under different lighting conditions as required by photogrammetry and photometric stereo techniques. We show the benefit of such a combination through some experimental tests. The experiments showed that the proposed method recovers the surface topography at the same high-resolution achievable with photometric stereo while preserving the photogrammetric accuracy. Furthermore, we exploit light directionality and multiple light sources to improve the quality of dense image matching in poorly textured surfaces.