Nanoplasmonic hydrogen sensors are predicted to play a key role in safety systems of the emerging hydrogen economy. Pd nanoparticles are the active material of choice for sensor prototype development due to their ability to form a hydride at ambient conditions, which creates the optical contrast. Here, we introduce plasmonic hydrogen sensors made from a thermoplastic nanocomposite material, that is, a bulk material that can be molded with standard plastic processing techniques, such as extrusion and three-dimensional (3D) printing, while at the same time being functionalized at the nanoscale. Specifically, our plasmonic plastic is composed of hydrogen-sensitive and plasmonically active Pd nanocubes mixed with a poly(methyl methacrylate) matrix, and we optimize it by characterization from the atomic to the macroscopic level. We demonstrate melt-processed deactivation-resistant plasmonic hydrogen sensors, which retain full functionality even after 50 weeks. From a wider perspective, we advertise plasmonic plastic nanocomposite materials for application in a multitude of active plasmonic technologies since they provide efficient scalable processing and almost endless functional material design opportunities via tailored polymer–colloidal nanocrystal combinations.
Surfactants and stabilizers are always present on the surfaces of colloidal nanocrystals due to their critical function in promoting selective facet growth and since they are essential to prevent aggregate formation in solution. After synthesis, however, the presence of these molecules on the surface of a nanocrystal is problematic because they potentially significantly alter the nature of the interaction with the environment, which is critical for sensor or catalysis applications. Here, we quantitatively scrutinize this effect experimentally for the four most common stabilizers in Pd nanoparticle synthesis: cetyltrimethylammonium bromide (CTAB), tetraoctylammonium bromide (TOAB), cetyltrimethylammonium chloride (CTAC), and poly(vinylpyrrolidone) (PVP). We use the surface-catalyzed hydrogen sorption and hydride formation reaction in Pd as a model system, due to its high relevance for hydrogen sensors. Specifically, we map in detail the (de)hydrogenation kinetics of arrays of nanofabricated Pd nanodisks in the presence of the surfactants and benchmark it with an uncoated Pd reference. As the key results, we find that the cationic surfactants significantly decelerate the (de)hydrogenation surface reaction, with the amplitude of deceleration mediated by the interplay between the halide-ion−Pd surface interaction strength and surfactant surface density. In contrast, a polymeric PVP coating is found to significantly accelerate hydrogen sorption. For the Pd-based hydrogen sensor application, our findings thus provide important insights for the appropriate choice of a surfactant to minimize the negative impact on hydrogen sorption kinetics and thus hydrogen detection response/recovery times. In a wider perspective, our results dramatically show how nanoparticles can attain different properties depending on what types of surfactants and stabilizers are present on their surface and how critical the quantitative understanding of their impact is for a specific application.
Hydrogen (H 2 ) sensors that can be produced en masse with cost-effective manufacturing tools are critical for enabling safety in the emerging hydrogen economy. The use of melt-processed nanocomposites in this context would allow the combination of the advantages of plasmonic hydrogen detection with polymer technology; an approach which is held back by the slow diffusion of H 2 through the polymer matrix. Here, we show that the use of an amorphous fluorinated polymer, compounded with colloidal Pd nanoparticles prepared by highly scalable continuous flow synthesis, results in nanocomposites that display a high H 2 diffusion coefficient in the order of 10 –5 cm 2 s –1 . As a result, plasmonic optical hydrogen detection with melt-pressed fluorinated polymer nanocomposites is no longer limited by the diffusion of the H 2 analyte to the Pd nanoparticle transducer elements, despite a thickness of up to 100 μm, thereby enabling response times as short as 2.5 s at 100 mbar (≡10 vol. %) H 2 . Evidently, plasmonic sensors with a fast response time can be fabricated with thick, melt-processed nanocomposites, which paves the way for a new generation of robust H 2 sensors.
Metal nanoparticles are currently used in a variety of applications, ranging from life sciences to nanoelectronic devices to gas sensors. In particular, the use of palladium nanoparticles is gaining increasing attention due to their ability to catalyze the rapid dissociation of hydrogen, which leads to an excellent response in hydrogen-sensing applications. However, current palladium-nanoparticle-based sensors are hindered by the presence of hysteresis upon hydride formation and decomposition, as this hysteresis limits sensor accuracy. Here, we present a robust colloidal synthesis for palladium–gold alloy nanoparticles and demonstrate their hysteresis-free response when used for hydrogen detection. The obtained colloidal particles, synthesized in an aqueous, room-temperature environment, can be tailored to a variety of applications through changing the size, ratio of metals, and surface stabilization. In particular, the variation of the viscosity of the mixture during synthesis resulted in a highly tunable size distribution and contributed to a significant improvement in size dispersity compared to the state-of-the-art methods.
Guided deposition of nanoparticles onto different substrates is of great importance for a variety of applications such as biosensing, targeted cancer therapy, anti-bacterial coatings and single molecular electronics. It is therefore important to gain an understanding of what parameters are involved in the deposition of nanoparticles. In this work we have deposited 60 nm, negatively charged, citrate stabilized gold nanoparticles onto microstructures consisting of six different materials, (vanadium (V), silicon dioxide (SiO2), gold (Au), aluminum (Al), copper (Cu) and nickel (Ni)). The samples have then been investigated by scanning electron microscopy to extract the particle density. The surface potential was calculated from the measured surface charge density maps measured by atomic force microscopy while the samples were submerged in a KCl water solution. These values were compared with literature values of the isoelectric points (IEP) of different oxides formed on the metals in an ambient environment. According to measurements, Al had the highest surface potential followed by Ni and Cu. The same trend was observed for the nanoparticle densities. No particles were found on V, SiO2 and Au. The literature values of the IEP showed a different trend compared to the surface potential measurements concluding that IEP is not a reliable parameter for the prediction of NP deposition.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.