No abstract

Nanopatterned surfaces administer antibacterial activity through contact-induced mechanical stresses and strains, which can be modulated by changing the nanopattern’s radius, spacing and height. However, due to conflicting recommendations throughout the theoretical literature with poor agreement to reported experimental trends, it remains unclear whether these key dimensions—particularly radius and spacing—should be increased or decreased to maximize bactericidal efficiency. It is shown here that a potential failure of biophysical models lies in neglecting any out-of-plane effects of nanopattern contact. To highlight this, stresses induced by a nanopattern were studied via an analytical model based on minimization of strain and adhesion energy. The in-plane (areal) and out-of-plane (contact pressure) stresses at equilibrium were derived, as well as a combined stress (von Mises), which comprises both. Contour plots were produced to illustrate which nanopatterns elicited the highest stresses over all combinations of tip radius between 0 and 100 nm and center spacing between 0 and 200 nm. Considering both the in-plane and out-of-plane stresses drastically transformed the contour plots from those when only in-plane stress was evaluated, clearly favoring small tipped, tightly packed nanopatterns. In addition, the effect of changes to radius and spacing in terms of the combined stress showed the best qualitative agreement with previous reported trends in killing efficiency. Together, the results affirm that the killing efficiency of a nanopattern can be maximized by simultaneous reduction in tip radius and increase in nanopattern packing ratio (i.e., radius/spacing). These findings provide a guide for the design of highly bactericidal nanopatterned surfaces.

No abstract

No abstract

The rapid emergence and global spread of the COVID-19 causing Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) and its subsequent mutated strains has caused unprecedented health, economic, and social devastation. Respiratory viruses such as SARS-CoV-2 can be transmitted through both direct and indirect channels, including aerosol respiratory droplets, contamination of inanimate surfaces (fomites), and direct person-to-person contact. Current methods of virus inactivation on surfaces include chemicals and biocides, and while effective, continuous and repetitive cleaning of all surfaces is not always viable. Recent work in the field of biomaterials engineering has established the antibacterial effects of hydrothermally synthesized TiO 2 nanostructured surfaces against both Gram-negative and -positive bacteria. The current study investigates the effectiveness of said TiO 2 nanostructured surfaces against two enveloped human coronaviruses, SARS-CoV-2 and HCoV-NL63, and nonenveloped HRV-16 for surface-based inactivation. Results show that structured surfaces reduced infectious viral loads of SARS-CoV-2 (5 log), HCoV-NL63 (3 log), and HRV-16 (4 log) after 5 h, compared to nonstructured and tissue culture plastic control surfaces. Interestingly, infectious virus remained present on control tissue culture plastic after 7 h exposure. These encouraging results establish the potential use of nanostructured surfaces to reduce the transmission and spread of both enveloped and nonenveloped respiratory viruses, by reducing their infectious period on a surface. The dual antiviral and antibacterial properties of these surfaces support their potential application in a wide variety of settings such as hospitals and healthcare environments, public transport and community hubs.