The main objective of the present study is to assess the loading rate effects on mode-I delamination growth in glass/epoxy laminated composites. Furthermore, hybrid reinforcement of these composites by incorporating carbon nanofibers (CNFs) was followed to enhance the interlaminar fracture resistance and affect its loading rate sensitivity. Experiments on DCB specimens made of glass/epoxy and glass/CNF/epoxy laminated composites were conducted by varying the loading rate from standard quasi-static testing up to 200 mm/sec crosshead speed in a servo-hydraulic test machine. More than 21% decrease was observed in the propagation fracture toughness of the glass/epoxy samples due to loading rate elevation in the studied range. Moreover, the results of the present study clearly show the benefits of CNF modification, not only in enhancing the fracture toughness but also in reducing the loading rate dependency. Adding CNFs to glass/epoxy composites caused 32.8% and 13.5% increase in the quasi-static values of the initiation-and propagation-interlaminar fracture toughness (G IC), respectively. Also, owing to CNF incorporation, the maximum drop in the propagation fracture toughness at elevated loading rates was decreased to 8%. Fractography inspections were performed to provide an in-depth explanation for the observed loading rate effects and the advantages of CNF reinforcement.

This work aims at studying the loading rate dependency of mode I delamination growth in CFRPs, using typical fracture toughness analysis through both the R-curve and the crack tip opening rate. The average SERR is a method of data reduction based on energy balance which has been previously introduced to characterize delamination growth under different types of loading conditions in a similar manner. In the present research, the application of this method was extended to further analyze the results of delamination experiments at different loading rates. Mode I delamination tests on double cantilever beam specimens were performed at displacement rates varying from standard quasi-static testing up to 400 mm/s. A clear decrease in the propagation fracture toughness as well as in the average SERR was observed at high loading rates. The reduced fracture resistance at elevated rates was physically explained in correlation with fiber bridging, fiber breakage, and matrix cleavage observed in fracture surfaces via scanning electron microscopy.

No abstract