No abstract

This paper presents a monolithic three-axis accelerometer with wafer-level package by CMOS MEMS process. The compositions of the microstructure are selected from CMOS layers in order to suppress the in-plane and out-of-plane bending deflection caused by the residual stresses in multiple layers. A switched-capacitor sensing circuit with a trimming mechanism is used to amplify the capacitive signal, and decrease the output dc offset voltage to ensure the desired output voltage swing. The CMOS MEMS wafer is capped with a silicon wafer using a polymer-based material. The measured sensitivities with and without a wafer-level package range from 113 mV/G to 124 mV/G for the in-plane (x-axis, y-axis) accelerometer, and from 50 mV/G to 53 mV/G for the z-axis accelerometer, respectively.

No abstract

Magnetic microbeads are widely used in biotechnology and biomedical research for manipulation and detection of cells and biomolecules. Most lab-on-chip systems capable of performing manipulation and detection require external instruments to perform one of the functions, leading to increased size and cost. This work aims at developing an integrated platform to perform these two functions by implementing electromagnetic microcoils and capacitive biosensors on a CMOS (complementary metal oxide semiconductor) chip. Compared to most magnetic-type sensors, our detection method requires no externally applied magnetic fields and the associated fabrication is less complicated. In our experiment, microbeads coated with streptavidin were driven to the sensors located in the center of microcoils with functionalized anti-streptavidin antibody. Detection of a single microbead was successfully demonstrated using a capacitance-to-frequency readout. The average capacitance changes for the experimental and control groups were -5.3 fF and -0.2 fF, respectively.