Renewable hydrocarbons refer to fuels consisting of hydrocarbons of 10 to 20 carbon atoms, produced from biomass, and free of oxygen. Hydrocracking, hydrodeoxygenation and hydrotreatment processes for the production of renewable hydrocarbons are described in the literature. Microalgae have been targeted in recent years to synthesize biomass that can be used in the production of biofuels, such as renewable hydrocarbons, biodiesel or ethanol second generation. In this context the lineage Monoraphidium sp. was selected from previous ecophysiological studies and its potential to produce lipids to develop this research related with the extraction of the bio-oil of the wet biomass of Monoraphidium sp. through heat treatment. Consecutively the bio-oil was used as raw material for the production of hydrocarbons through hydrocracking and hydrodeoxygenation processes (HDO) as: decarbonylation, decarboxylation, dehydratation, with in situ production of hydrogen from liquid-phase reforming of glycerol. The reactions were carried out under two different temperature conditions, 350˚C and 300˚C, respectively, for 1 h and using ruthenium alumina catalyst (Ru/Al 2 O 3). The results showed the bio-oil processing route at a temperature of 350˚C promising for the production of hydrocarbons achieving a conversion of 81.54%.

Microalgae are unicellular organisms capable of photosynthesis, turning sunlight and carbon dioxide (CO 2) into rich biomass. Precisely because of this definition, in recent years various sectors have been targeting their ability to reduce CO 2 emissions and the capacity of simultaneously synthesize biomass which can be later used to produce bio-fuels. Besides being considered fast-growth microorganisms, microalgae have a diverse biochemical composition with similar characteristics to traditional biomass. In this context, the present work aimed to evaluate the biofixation of CO 2 by the microalgae Monoraphidium sp., cultivated in a closed-window type photobioreactor, as well as characterization of microalgal biomass produced in relation to the total lipid content (TL), lipids converted into biodiesel (LCB), carbohydrates and proteins. The results achieved showed that the best result was obtained after 24 h of cultivation, where for each gram of biomass produced approximately 1.2 g of CO 2 were consumed. In the growth phase the average biomass productivity in the Janela photobioreactor was 58 mg•L −1 •day −1 concluding that microalgae culture systems could be coupled to the chimneys of large industries emitters CO 2 using this gas, resulting from combustion processes, in the process of photosynthesis. The biomass Monoraphidium sp. produced had a content of lipids converted into biodiesel of approximately 8.36% ± 2.69%, carbohydrates 32% ± 3.37% and proteins 34.26% ± 0.41%.