Wireless connectivity has been realized for multiple environments and different frequency bands. However, little research exists about mmWave communication in industrial environments. This paper presents the 60 GHz double-directional radio channel for mmWave communication in a ship hull for Line-of-Sight (LOS) and non-Line-of-Sight (NLOS) conditions. We performed channel measurements using the Terragraph channel sounder at different locations in the ship hull and fitted LOS path loss to a one-slope path loss model. Path loss and root-mean-square delay spread of the LOS path is compared to the reflected path with lowest path loss. NLOS communication via this first-order reflected path is modeled by calculating the path distance and determining the reflection loss. The reflection losses have a considerable contribution to the signal attenuation of the reflected path. The channel models are implemented in an indoor coverage prediction tool, which was extended with a ray launching algorithm and validated by comparison with an analytical electromagnetic solver. The results show that the mmWave radio channel allows high-throughput communication within a ship hull compartment, even when no LOS path between the transmitter and receiver is present.

With the increased resolution and frame rates of video recordings, in combination with the current evolution towards video-on-demand streaming services and the user expecting ubiquitous wireless connectivity, it is necessary to design wireless communication systems that allow high-rate data transfer. The large bandwidths that are available in the mmWave frequency band allow such high data rates. In this paper, we provide an experimental and simulated indoor residential radio channel model at V-band frequencies and perform packet error rate and throughput measurements at 60 GHz using IEEE 802.11ad transceivers. We compare the path loss and throughput measurements to simulations using a network performance prediction tool. The path loss measurement results using an omnidirectional transmit antenna correspond well to generic indoor mmWave channel models. Double-directional path loss measurements show that generic models underestimate path loss of non-Line-of-Sight (NLOS) links. A ray-launching algorithm is designed and validated, and used for IEEE 802.11ad throughput estimation based on link budget calculations. The link budget underestimates the achieved throughput, when comparing to adaptive-rate MCS selection in a commercial transceiver, based on the measured signal-to-noise ratio. Packet error rate measurements confirm that, even for NLOS links, throughputs exceeding 1 Gbps are possible.