The study addressed the effect of the structure of silicone polyethers on selected functional properties of cotton fabric rinsed in conditioners containing the additives under study. Fabric softener formulations containing two comb-structured compounds (PEG/PPG-14/0 Dimethicone and PEG/PPG-20/20 Dimethicone) and one block-structured compound (Bis-PEG/PPG-20/20 Dimethicone) were developed. Cotton fabric rinsed in conditioners containing silicone glycols was not found to be affected by yellowing. However, differences were noted in the softening ability and re-wettability of rinsed fabrics due to diverse structures of the additives used. The most desirable soft hand effect was observed after cotton rinsing in fabric softeners containing the block-structured compound Bis-PEG/PPG-20/20 Dimethicone. In contrast, the highest fabric re-wettability was shown for the conditioner enriched with a comb-structured compound (PEG/PPG-20/20 Dimethicone). The study results demonstrate that the prototypical fabric softeners containing silicone derivatives have a potential to provide quality characteristic required by consumers of this product group.
The study investigated the effect of chamomile extract obtained in supercritical carbon dioxide conditions on the basic properties of pharmaceutical ointments. A total of five formulations were designed and prepared, differing in the weight ratio of sunflower oil to chamomile extract (5:0, 3.5:1.5, 2.5:2.5, 1.5:3.5 and 0:5). An increase in the concentration of chamomile extract was found to be accompanied by a decrease in hardness, adhesive power and flow limit. Based on viscosity measurements it was shown that ointments containing the hydrophobic plant extract under study were prone to larger drops in viscosity under the effect of the set shear rate. It was determined that from the viewpoint of ointment spreadability and application to the skin, the optimum concentration of chamomile extract for the studied formulations should be within the range of 1.5-2.5%. Furthermore, the addition of chamomile extract to ointments was found to give samples a yellow-green color. Green was observed to be the dominant color, and its saturation and shade varied for different formulations.
The paper presents description and analysis of the results obtained in the investigation performed on a disc-ball tribotester T-11. Samples of 100Cr6 steel were tested, while as lubricant the mixtures of paraffin oil, with addition of 0.5%, 1%, and 2% of liquid crystalline compounds, from two homologous series defined with nOBCAB and nCBB symbols, were used. The friction force and wear of a sample and a counter-sample were measured. The improvement in tribological and anti-wear properties was found for all mixtures in relation to paraffin oil. The best tribological properties and the best wearability were obtained for mixtures with a compound 8CBB. This compound differs from the others in formation of different liquid crystalline phases.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.