In this paper, we report the results of investigation of 9.5 µm AlGaAs/GaAs and strain compensated 4.7 µm AlInAs/InGaAs/InP QCLs. We also show the results for 9.5 µm lasers based on lattice matched AlInAs/InGaAs/InP structures. The developed GaAs/AlGaAs lasers show the record pulse powers of 6 W at 77 K and up to 50 mW at 300 K. This has been achieved by careful optimization of the MBE growth process and by applying a high reflectivity metallic coating to the back facet of the laser. The 9.5 µm AlInAs/InGaAs/InP lasers utilize AlInAs waveguide and were grown exclusively by MBE without MOCVD regrowth. The short wavelength, strain compensated QCLs were grown by MOCVD. They represent state‐of‐the‐art parameters for the devices of their design. For epitaxial process control, the atomic‐force microscopy (AFM), high resolution X‐ray diffraction (HR‐XRD) and transmission electron microscopy (TEM) were used to characterize the morphological and structural properties of the layers. The basic electro‐optical characterization of the lasers is provided. We also present results of Green's function modeling of mid‐IR QCLs and demonstrate the capability of non‐equilibrium Green's function (NEGF) approach for sophisticated but still computationally effective simulation of laser's characteristics.
We report on detailed experimental investigation of thermal properties of AlGaAs/GaAs quantum cascade lasers (QCLs) emitting at wavelength of 9.4 μm. Different mounting options and device geometries are compared in terms of their influence on the relative increase of the active region temperature. High resolution, spatially resolved thermoreflectance is used for mapping temperature distribution over the facet of pulse operated QCLs. The devices’ thermal resistances are derived from experimental data. We also develop a numerical thermal model of QC lasers, solving heat transport equation in 2D and 3D, which includes anisotropy of thermal conductivity. By combining experimental and numerical results, an insight into thermal management in QCLs is gained. Thermal optimization of the design focuses on improving heat dissipation in the device, which is essential to increase the maximal operation temperature of the devices.
In this paper we present an extensive theoretical and numerical analysis of monolithic high-index contrast grating, facilitating simple manufacture of compact mirrors for very broad spectrum of vertical-cavity surface-emitting lasers (VCSELs) emitting from ultraviolet to mid-infrared. We provide the theoretical background explaining the phenomenon of high reflectance in monolithic subwavelength gratings. In addition, by using a three-dimensional, fully vectorial optical model, verified by comparison with the experiment, we investigate the optimal parameters of high-index contrast grating enabling more than 99.99% reflectance in the diversity of photonic materials and in the broad range of wavelengths.
The fabrication of quantum cascade lasers emitting at 9 µm is reported. The devices operated in pulsed mode at up to 260 K. The peak powers recorded at 77 K were over 1 W and the slope efficiency η ≈ 0.5-0.6 W/A per uncoated facet. This has been achieved by the use of GaAs/Al0.45Ga0.55As heterostructure, with the "anticrossed-diagonal" design. Double plasmon planar confinement with Al-free waveguide has been used to minimize absorption losses. The double trench lasers were fabricated using standard processing technology, i.e., wet etching and Si3N4 for electrical insulation. The quantum cascade laser structures have been grown by molecular beam epitaxy, with Riber Compact 21 T reactor. The stringent requirements -placed particularly on the epitaxial technology -and the influence of technological conditions on the device structure properties were presented and discussed in depth.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.