In time-domain diffuse optics the sensitivity to localized absorption changes buried inside a diffusive medium depends strongly on the interplay between instrumental, optical and geometrical parameters, which can hinder the theoretical advantages of novel measurement strategies like the short source-detector distance approach. Here, we present a study based on experimental measurements and simulations to comprehensively evaluate the effect of all different parameters. Results are evaluated exploiting standardized figures of merit, like contrast and contrast-to-noise ratio, to quantify the system sensitivity to deep localized absorption perturbations. Key findings show that the most critical hardware parameter is the memory effect which ultimately limits the dynamic range. Further, a choice of the source-detector distance around 10 mm seems to be a good compromise to compensate non-idealities in practical systems still preserving the advantages of short distances. This work provides both indications for users about the best measurement conditions and strategies, and for technology developers to identify the most crucial hardware features in view of next generation diffuse optics systems.

No abstract

. Significance : Multi-laboratory initiatives are essential in performance assessment and standardization—crucial for bringing biophotonics to mature clinical use—to establish protocols and develop reference tissue phantoms that all will allow universal instrument comparison. Aim : The largest multi-laboratory comparison of performance assessment in near-infrared diffuse optics is presented, involving 28 instruments and 12 institutions on a total of eight experiments based on three consolidated protocols (BIP, MEDPHOT, and NEUROPT) as implemented on three kits of tissue phantoms. A total of 20 synthetic indicators were extracted from the dataset, some of them defined here anew. Approach : The exercise stems from the Innovative Training Network BitMap funded by the European Commission and expanded to include other European laboratories. A large variety of diffuse optics instruments were considered, based on different approaches (time domain/frequency domain/continuous wave), at various stages of maturity and designed for different applications (e.g., oximetry, spectroscopy, and imaging). Results : This study highlights a substantial difference in hardware performances (e.g., nine decades in responsivity, four decades in dark count rate, and one decade in temporal resolution). Agreement in the estimates of homogeneous optical properties was within 12% of the median value for half of the systems, with a temporal stability of over 1 h, and day-to-day reproducibility of . Other tests encompassed linearity, crosstalk, uncertainty, and detection of optical inhomogeneities. Conclusions : This extensive multi-laboratory exercise provides a detailed assessment of near-infrared Diffuse optical instruments and can be used for reference grading. The dataset—available soon in an open data repository—can be evaluated in multiple ways, for instance, to compare different analysis tools or study the impact of hardware implementations.

Two main bottlenecks prevent time-domain diffuse optics instruments to reach their maximum performances, namely the limited light harvesting capability of the detection chain and the bounded data throughput of the timing electronics. In this work, for the first time to our knowledge, we overcome both those limitations using a probe-hosted large area silicon photomultiplier detector coupled to high-throughput timing electronics. The system performances were assessed based on international protocols for diffuse optical imagers showing better figures with respect to a state-of-the-art device. As a first step towards applications, proof-of-principle in-vivo brain activation measurements demonstrated superior signal-to-noise ratio as compared to current technologies.

In this paper, we present an innovative instrument for near-infrared time-resolved spectroscopy. The system is based on eight custom-designed pulsed diode lasers emitting at different wavelengths in the near-infrared region (635-1050 nm), all exhibiting an average optical power higher than 1 mW at 40 MHz pulse repetition rate, two custom-made single-photon detectors based on wide-area silicon photomultipliers and two time-measurement units based on a custom time-to-digital converter with 10 ps timing resolution. The system instrument response function has a width narrower than 160 ps (fullwidth at half-maximum) and stability better than ±1% for several hours for all the wavelengths. All the components of the instrument were designed in order to be compact. The entire system will be hosted in a standard 19 inches, 5U rack case (size 48 × 38 × 20 cm 3). The system communicates with the external computer through a USB 2.0 link and is designed to be employed in a clinical environment. The proposed instrument, thanks to the reduction of its cost and dimensions, paves the way to a wider diffusion of multiwavelengths near-infrared time-resolved spectroscopy systems.