Surface tension driven transport of liquids on open substrates offers an enabling tool for open micro total analysis systems that are becoming increasingly popular for low-cost biomedical diagnostic devices. The present study uses a facile wettability patterning method to produce open microfluidic tracks that - due to their shape, surface texture and chemistry - are capable of transporting a wide range of liquid volumes (~1-500 μL) on-chip, overcoming viscous and other opposing forces (e.g., gravity) at the pertinent length scales. Small volumes are handled as individual droplets, while larger volumes require repeated droplet transport. The concept is developed and demonstrated with coatings based on TiO2 filler particles, which, when present in adequate (~80 wt.%) quantities within a hydrophobic fluoroacrylic polymer matrix, form composites that are intrinsically superhydrophobic. Such composite coatings become superhydrophilic upon exposure to UV light (390 nm). A commercial laser printer-based photo-masking approach is used on the coating for spatially selective wettability conversion from superhydrophobic to superhydrophilic. Carefully designed wedge-patterned surface tension confined tracks on the open-air devices move liquid on them without power input, even when acting against gravity. Simple designs of wettability patterning are used on versatile substrates (e.g., metals, polymers, paper) to demonstrate complex droplet handling tasks, e.g., merging, splitting and metered dispensing, some of which occur in 3-D geometries. Fluid transport rates of up to 350 μL s(-1) are attained. Applicability of the design on metal substrates allows these devices to be used also for other microscale engineering applications, e.g., water management in fuel cells.

Dropwise condensation (DWC) heat transfer depends strongly on the maximum diameter (Dmax) of condensate droplets departing from the condenser surface. This study presents a facile technique implemented to gain control of Dmax in DWC within vapor/air atmospheres. We demonstrate how this approach can enhance the corresponding heat transfer rate by harnessing the capillary forces in the removal of the condensate from the surface. We examine various hydrophilic-superhydrophilic patterns, which, respectively, sustain and combine DWC and filmwise condensation on the substrate. The material system uses laser-patterned masking and chemical etching to achieve the desired wettability contrast and does not employ any hydrophobizing agent. By applying alternating straight parallel strips of hydrophilic (contact angle ∼78°) mirror-finish aluminum and superhydrophilic regions (etched aluminum) on the condensing surface, we show that the average maximum droplet size on the less-wettable domains is nearly 42% of the width of the corresponding strips. An overall improvement in the condensate collection rate, up to 19% (as compared to the control case of DWC on mirror-finish aluminum) was achieved by using an interdigitated superhydrophilic track pattern (on the mirror-finish hydrophilic surface) inspired by the vein network of plant leaves. The bioinspired interdigitated pattern is found to outperform the straight hydrophilic-superhydrophilic pattern design, particularly under higher humidity conditions in the presence of noncondensable gases (NCG), a condition that is more challenging for maintaining sustained DWC.

Marine oil spills seriously endanger sea ecosystems and coastal environments, resulting in a loss of energy resources. Environmental and economic demands emphasize the need for new methods of effectively separating oil-water mixtures, while collecting oil content at the same time. A new surface-tension-driven, gravity-assisted, one-step, oil-water separation method is presented for sustained filtration and collection of oil from a floating spill. A benchtop prototype oil collection device uses selective-wettability (superhydrophobic and superoleophilic) stainless steel mesh that attracts the floating oil, simultaneously separating it from water and collecting it in a container, requiring no preseparation pumping or pouring. The collection efficiencies for oils with wide ranging kinematic viscosities (0.32-70.4 cSt at 40 °C) are above 94%, including motor oil and heavy mineral oil. The prototype device showed high stability and functionality over repeated use, and can be easily scaled for efficient cleanup of large oil spills on seawater. In addition, a brief consolidation of separation requirements for oil-water mixtures of various oil densities is presented to demonstrate the versatility of the material system developed herein.

No abstract

Self-driven surface micromixers (SDSM) relying on patterned-wettability technology provide an elegant solution for low-cost, point-of-care (POC) devices and lab-on-a-chip (LOC) applications. We present a SDSM fabricated by strategically patterning three wettable wedge-shaped tracks onto a nonwettable, flat surface. This SDSM operates by harnessing the wettability contrast and the geometry of the patterns to promote mixing of small liquid volumes (µL droplets) through a combination of coalescence and Laplace pressure-driven flow. Liquid droplets dispensed on two juxtaposed branches are transported to a coalescence station, where they merge after the accumulated volumes exceed a threshold. Further mixing occurs during capillary-driven, advective transport of the combined liquid over the third wettable track. Planar, non-wettable "islands" of different shapes are also laid on this third track to alter the flow in such a way that mixing is augmented. Several SDSM designs, each with a unique combination of island shapes and positions, are tested, providing a greater understanding of the different mixing regimes on these surfaces. The study offers design insights for developing low-cost surface microfluidic mixing devices on open substrates.Microfluidic devices capable of achieving complex liquid-handling tasks, such as transport, metering, separation and mixing, have found niche applications in numerous fields, including point-of-care (POC) diagnostics 1 , lab-on-a-chip (LOC) applications 2-5 , and micro total analysis systems (μTAS) 6 . Although most conventional microfluidics devices have historically deployed flow-through systems, a more recent strategy of handling liquid samples in the form of discrete droplets has gained popularity 7 . Droplet-based microfluidics is advantageous over flow-through microfluidics, since the liquid sample handling in the former is relatively free from the common problems of the latter, such as axial dispersion, sample dilution, and cross-contamination 8, 9 . In droplet-based microfluidics, individual (or sequences of) droplets of the sample liquid may be handled either within an immiscible liquid in a closed microchannel 10 or on open surfaces 11 . The dispensed liquid volumes range from 1 μL to 1 mL; the lower range is common to many microfluidic applications 12 , while the larger volumes are relevant to on-chip liquid storage 13 , or some specialized microfluidic applications that require larger samples (e.g. whole-blood assays 14,15 ). Open-surface type microfluidic devices offer the possibility of low-cost fabrication -these devices can be built on low-cost, paper or plastic surfaces and do not require elaborate fabrication of embedded microchannels -and hence, are ideally suited for POC diagnostics 16 .Like the flow-through microfluidic devices, rapid and efficient mixing is also an essential pre-requisite for open-surface microfluidic platforms. Open-surface micromixers may be of active or passive type, depending on whether external energy input is required or not, respectivel...