No abstract

To optimize existing iron ore reduction processes or to develop new ones, it is necessary to know the reduction kinetics of the iron ore of interest under the relevant operating conditions. In this work the reduction kinetics of hematite fine iron ore was studied for industrial-scale processes using the fluidized bed technology. Especially designed batch tests were performed in a laboratory-scale fluidized bed reactor fluidized with H 2 , H 2 O, CO, CO 2 , N 2 at atmospheric and elevated pressures to simulate the relevant process conditions. To obtain the reduction rates and the degree of reduction, the concentrations of H 2 O, CO, and CO 2 in the outlet gas were analyzed by FT-IR spectroscopy.Preliminary reduction tests showed a strong effect of the sample weight on the reduction rates, especially in the early stages of reduction. The optimum sample weight was determined by partly replacing the hematite with silica sand. Additionally, the silica sand provided a constant and stable flow pattern throughout the reduction tests. The effects of temperature, gas composition, particle size and pressure on the rates of reduction were tested and discussed.Rate analysis showed the existence of two phases with different rates during the reduction tests. Additional investigations (microscope analysis, SEM) demonstrated that in the first phase the rates were controlled by mass transport in the gas phase and in the second phase by the reduction process within the small grains of the iron ore particles.KEY WORDS: iron ore reduction; high temperature fluidized bed; reduction kinetics; elevated pressure; H 2 -CO gas mixture.

Industrial-scale fluidized bed processes for iron ore reduction (e.g., FIOR and FINMET) are operated by continuous feeding of ore, while laboratory tests are mostly performed under batchwise operation. The reduction behavior under continuous operation is influenced by both the residence time of the iron ore particles and the reduction kinetics, which is obtained by batch tests. In a mathematical model for such a process, the effect of both phenomena has to be considered. The residence time distribution of iron ore particles in a laboratory fluidized bed reactor was obtained by measuring the response of a step input and described by mathematical models similar to a continuously stirred tank reactor. In the same reactor, reduction tests with continuous feeding of iron ore were performed. Based on batch tests in a fluidized bed reactor, a mathematical model was developed to describe the kinetics of iron ore reduction under fluidized bed conditions. This kinetic model was combined with the fluidized bed reactor model to describe continuous iron ore reduction. In this detailed model, the change of gas composition while rising in the fluidized bed was considered. The degree of reduction and the gas conversion for reactors in series were calculated. The results obtained by the mathematical model were compared with experimental data from the laboratoryscale reactor.