Organometal halide perovskite materials have triggered enormous attention for a wide range of high-performance optoelectronic devices. However, their stability and toxicity are major bottleneck challenges for practical applications. Substituting toxic heavy metal, that is, lead (Pb), with other environmentally benign elements, for example, tin (Sn), could be a potential solution to address the toxicity issue. Nevertheless, even worse stability of Sn-based perovskite material than Pb-based perovskite poses a great challenge for further device fabrication. In this work, for the first time, three-dimensional CHNHSnI perovskite nanowire arrays were fabricated in nanoengineering templates, which can address nanowire integration and stability issues at the same time. Also, nanowire photodetectors have been fabricated and characterized. Intriguingly, it was discovered that as the nanowires are embedded in mechanically and chemically robust templates, the material decay process has been dramatically slowed down by up to 840 times, as compared with a planar thin film. This significant improvement on stability can be attributed to the effective blockage of diffusion of water and oxygen molecules within the templates. These results clearly demonstrate a new and alternative strategy to address the stability issue of perovskite materials, which is the major roadblock for high-performance optoelectronics.

The necessity for new sources for greener and cleaner energy production to replace the existing ones has been increasingly growing in recent years. Of those new sources, the hydrogen evolution reaction has a large potential. In this work, for the first time, MoSe /Mo core-shell 3D-hierarchical nanostructures are created, which are derived from the Mo 3D-hierarchical nanostructures through a low-temperature plasma-assisted selenization process with controlled shapes grown by a glancing angle deposition system.

Herein, we report the preparation of Pongam seed shells-derived activated carbon and cobalt oxide (∼2-10 nm) nanocomposite (PSAC/Co3O4) by using a general and facile synthesis strategy. The as-synthesized PSAC/Co3O4 samples were characterized by a variety of physicochemical techniques. The PSAC/Co3O4-modified electrode is employed in two different applications such as high performance nonenzymatic glucose sensor and supercapacitor. Remarkably, the fabricated glucose sensor is exhibited an ultrahigh sensitivity of 34.2 mA mM(-1) cm(-2) with a very low detection limit (21 nM) and long-term durability. The PSAC/Co3O4 modified stainless steel electrode possesses an appreciable specific capacitance and remarkable long-term cycling stability. The obtained results suggest the as-synthesized PSAC/Co3O4 is more suitable for the nonenzymatic glucose sensor and supercapacitor applications outperforming the related carbon based modified electrodes, rendering practical industrial applications.

The ORCID identification number(s) for the author(s) of this article can be found under https://doi.org/10. 1002/smll.201904271. Recently, 2D transition metal dichalcogenides (TMDs) have become intriguing materials in the versatile field of photonics and optoelectronics because of their strong light-matter interaction that stems from the atomic layer thickness, broadband optical response, controllable optoelectronic properties, and high nonlinearity, as well as compatibility. Nevertheless, the low optical cross-section of 2D-TMDs inhibits the light-matter interaction, resulting in lower quantum yield. Therefore, hybridizing the 2D-TMDs with plasmonic nanomaterials has become one of the promising strategies to boost the optical absorption of thin 2D-TMDs. The appeal of plasmonics is based on their capability to localize and enhance the electromagnetic field and increase the optical path length of light by scattering and injecting hot electrons to TMDs. In this regard, recent achievements with respect to hybridization of the plasmonic effect in 2D-TMDs systems and its augmented optical and optoelectronic properties are reviewed. The phenomenon of plasmon-enhanced interaction in 2D-TMDs is briefly described and state-of-the-art hybrid device applications are comprehensively discussed. Finally, an outlook on future applications of these hybrid devices is provided. www.advancedsciencenews.com . His research directions include 1) direct growth, fundamental characterizations, and optoelectronic applications of 2D materials, including graphene and transition metal dichalcogenide. 2) Energy harvesting by Cu(In,Ga)Se 2 solar cells and phase-changed molten salts. 3) Low power-resistive random access memory.Small 2020, 16, 1904271 Scheme 1. Schematic diagram representing the hybridization of 2D-TMDs with plasmonic structures and various applications. (a) Reproduced with permission. [79]

An inductively coupled plasma (ICP) process was used to synthesize transition metal dichalcogenides (TMDs) through a plasma-assisted selenization process of metal oxide (MO x ) at a temperature as low as 250 °C. In comparison with other CVD processes, the use of ICP facilitates the decomposition of the precursors at low temperatures. Therefore, the temperature required for the formation of TMDs can be drastically reduced. WSe 2 was chosen as a model material system due to its technological importance as a p-type inorganic semiconductor with an excellent hole mobility. Large-area synthesis of WSe 2 on polyimide (30 × 40 cm 2 ) flexible substrates and 8 in. silicon wafers with good uniformity was demonstrated at the formation temperature of 250 °C confirmed by Raman and X-ray photoelectron (XPS) spectroscopy. Furthermore, by controlling different H 2 /N 2 ratios, hybrid WO x /WSe 2 films can be formed at the formation temperature of 250 °C confirmed by TEM and XPS. Remarkably, hybrid films composed of partially reduced WO x and small domains of WSe 2 with a thickness of ∼5 nm show a sensitivity of 20% at 25 ppb at room temperature, and an estimated detection limit of 0.3 ppb with a S/N > 10 for the potential development of a low-cost plastic/wearable sensor with high sensitivity.