Application of laboratory-based X-ray analytical techniques that are capable of a reliable characterization of the chemical state of sulfur within bulk battery cathode in parallel with electrochemical characterization is essential for further development of lithium–sulfur batteries. In this work, MeV proton-induced X-ray emission (XES) sulfur measurements were performed in ex situ mode on laboratory-synthesized sulfur standards and precycled battery cathodes. The average sulfur charge was determined from the energy shift of the Kα emission line and from the spectral shape of the Kβ emission spectrum. Finally, operando Kα XES measurements were performed to monitor reduction of sulfur within battery cathode during discharge. The experimental approach presented here provides an important step toward more routine laboratory analysis of sulfur-based battery systems and also other sulfur-neighboring low- Z bulk materials with emission energies in the tender X-ray range.

In this work the valence-to-core (VtC) Kβ sulfur X-ray emission spectroscopy (XES) was used to perform quantitative analysis of different sulfur compounds produced in the lithium sulfur (Li-S) battery during...

X-ray Raman spectroscopy (XRS) is an emerging spectroscopic technique that utilizes inelastic scattering of hard X-rays to study X-ray absorption edges of low Z elements in bulk material. It was used to identify and quantify the amount of carbonyl bonds in a cathode sample, in order to track the redox reaction inside metal–organic batteries during the charge/discharge cycle. XRS was used to record the oxygen K-edge absorption spectra of organic polymer cathodes from different multivalent metal–organic batteries. The amount of carbonyl bond in each sample was determined by modeling the oxygen K-edge XRS spectra with the linear combination of two reference compounds that mimicked the fully charged and the fully discharged phases of the battery. To interpret experimental XRS spectra, theoretical calculations of oxygen K-edge absorption spectra based on density functional theory were performed. Overall, a good agreement between the amount of carbonyl bond present during different stages of battery cycle, calculated from linear combination of standards, and the amount obtained from electrochemical characterization based on measured capacity was achieved. The electrochemical mechanism in all studied batteries was confirmed to be a reduction of double carbonyl bond and the intermediate anion was identified with the help of theoretical calculations. X-ray Raman spectroscopy of the oxygen K-edge was shown to be a viable characterization technique for accurate tracking of the redox reaction inside metal–organic batteries.