This paper illustrates a proposed method for the retrieval of land surface temperature (LST) from the two thermal bands of the LANDSAT-8 data. LANDSAT-8, the latest satellite from Landsat series, launched on 11 February 2013, using LANDSAT-8 Operational Line Imager and Thermal Infrared Sensor (OLI & TIRS) satellite data. LANDSAT-8 medium spatial resolution multispectral imagery presents particular interest in extracting land cover, because of the fine spectral resolution, the radiometric quantization of 12 bits. In this search a trial has been made to estimate LST over Al-Hashimiya district, south of Babylon province, middle of Iraq. Two dates images acquired on 2nd &18th of March 2018 to retrieve LST and compare them with ground truth data from infrared thermometer camera (all the measurements contacted with target by using type-k thermocouple) at the same time of images capture. The results showed that the rivers had a higher LST which is different to the other land cover types, of less than 3.47 C ◦, and the LST different for vegetation and residential area were less than 0.4 C ◦ with correlation coefficient of the two bands 10 and 11 Rbnad10= 0.70, Rband11 = 0.89 respectively, for the imaged acquired on the 2nd of march 2018 and Rband10= 0.70 and Rband11 = 0.72 on the 18th of march 2018. These results confirm that the proposed approach is effective for the retrieval of LST from the LANDSAT-8 Thermal bands, and the IR thermometer camera data which is an effective way to validate and improve the performance of LST retrieval. Generally the results show that the closer measurement taken from the scene center time, a better quality to classify the land cover. The purpose of this study is to assess the use of LANDSAT-8 data to specify temperature differences in land cover and compare the relationship between land surface temperature and land cover types.

The water requirements of the wheat crop are represented by the actual evapotranspiration, which depends on the meteorological data of the study area and the amount of water consumed during the season. Estimation of crop coefficients (Kc) and evapotranspiration (ETc) using remote sensing data is essential for decision-making regarding water management in irrigated areas in arid and semi-arid large-scale areas. This research aims to estimate the crop coefficient calculated from remote sensing data and the actual evapotranspiration values for the crop. The FAO Penman-Monteith equation has been used to estimate the reference evapotranspiration from meteorological data. Linear regression analysis was applied by developing prediction equations for the crop coefficient for different growth stages of comparing with the vegetation cover index (NDVI). The results showed that (R 2 = 0.98) between field crop coefficient and crop coefficient predicted from (Kc = 2.0114 NDVI-0.147) in addition to (RMSE = 0.92 and (d = 0.97).

On a large scale, the land cover classification has been investigated throughout the world in remote sensing for different kinds of applications such as water resources, agricultural, environmental, as well as ecological and hydrological applications. In order enhance accuracy of the classification results, Landsat and multispectral bands are used to study the numerous classification methods. Remote sensing thermal data provides valuable information in order to examine the effectiveness of applying the thermal bands to extract useful land cover thematic maps. In this research, Landsat-8 satellite data captured by Operational Land Imager (OLI) and the Thermal Infrared (TIRS) Sensors, with using remotely sensing data and Geographic Information System (GIS) analysis with using ground truth data collect from fieldwork in same time of imagery capturing by using infrared thermometer camera. In 2018, single date Landsat-8 image of the study area in Iraq was captured in winter. This image is used to estimate Land Surface Temperature (LST) by split window algorithm and performing Land Cover (LC) classification after image noise removal by using supervised classification algorithms Support Vector Machine (SVM) with multi-spectral and thermal bands combinations to find out which one has more accuracy. Result shows the effective and efficiency of the proposed method compared by traditional classification methods. The overall accuracy and Kappa coefficient are 94.25%, 64.43% and 0.93, 0.63, respectively.

No abstract