Summary
Global Navigation Satellite System (GNSS) positioning technology has had widespread applications in the structural health monitoring as its overall performance has improved significantly in the last two decades. It is capable of providing timely and accurate structural vibration information such as dynamic displacements and modal frequencies at higher performance than traditional accelerometers. The studies summarized in this paper focus on the improvement of the multi‐sensors and multi‐constellation data acquisition techniques, the improvement of multiple approaches for erroneous noise mitigation, and innovative modal parameter identification methods. We also detailed the applications of GNSS on the deformation monitoring for towers, chimneys, tall buildings, and bridges. With continuous enhancements in the algorithm and hardware of GNSS, it is expected that the application of GNSS technology can be expanded to other fields such as bridge cable‐force measurements and bridge weight‐in‐motion as well as structural deformation monitoring.
The flexural behavioral properties of ultra high performance concrete (UHPC) low-profile T-beams reinforced with a combination of steel fibers and steel reinforcing bars were investigated in this paper. Five large scale T-beams were tested and analyzed regarding their deflection, ductility, strain, curvature, load capacity and crack development. The experimental variables include the reinforcement ratio, the slenderness (length to diameter ratio) of the fiber reinforcements, and the fiber type. The experiments showed that all specimens exhibit flexural failure with the yielding of steel bars and excessive expansion of flexural crack, and the compression zone in the reinforced UHPC low-profile T-beam is not crushed because of the ultra high compressive strength and area of UHPC. In addition, it was concluded that using hooked-end fibers can effectively increase the specimen’s durability-based cracking load in comparison to straight fibers of same slenderness, whereas the reinforcement ratio and the slenderness of the fibers have little influence on this. Increasing the reinforcement ratio and using hooked-end instead of straight fibers increase the load capacity and bending stiffness of the specimen, as well as reduces the crack width at comparable applied load. A model was established to compute the ultimate capacity of UHPC low-profile T-beams and the prediction agrees well with the experimental results in the present and published investigations.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.