Optical data links are the backbone of today's telecommunication infrastructure. The integration of electronic and optic components on one chip is one of the most attractive routes to further increase the system performance. Here, we present the fabrication of photodetectors based on CVD-grown graphene on silicon photonic waveguides. The devices operate bias-free in the Cband at 1550 nm and show an extrinsic −3 dB bandwidth of 41 GHz. We demonstrate that these detectors work at data rates up to 50 GBit/ s with excellent signal integrity.

We demonstrate for the first time a fully integrated electro-optic modulator based on locally strained silicon rib-waveguides. By depositing a Si3N4 strain layer directly on top of the silicon waveguide the silicon crystal is asymmetrically distorted. Thus its inversion symmetry is broken and a linear electro-optic effect is induced. Electro-optic characterization yields a record high value χ(2)(yyz) = 122 pm/V for the second-order susceptibility of the strained silicon waveguide and a strict linear dependence between the applied modulation voltage V(mod) and the resulting effective index change Δn(eff). Spatially resolved micro-Raman and terahertz (THz) difference frequency generation (DFG) experiments provide in-depth insight into the origin of the electro-optic effect by correlating the local strain distribution with the observed second-order optical activity.

We present detailed investigations of the local strain distribution and the induced second-order optical nonlinearity within strained silicon waveguides cladded with a Si₃N₄ strain layer. Micro-Raman Spectroscopy mappings and electro-optic characterization of waveguides with varying width w(WG) show that strain gradients in the waveguide core and the effective second-order susceptibility χ(2)(yyz) increase with reduced w(WG). For 300 nm wide waveguides a mean effective χ(2)(yyz) of 190 pm/V is achieved, which is the highest value reported for silicon so far. To gain more insight into the origin of the extraordinary large optical second-order nonlinearity of strained silicon waveguides numerical simulations of edge induced strain gradients in these structures are presented and discussed.

Metal-halide perovskites are promising lasing materials for the realization of monolithically integrated laser sources, the key components of silicon photonic integrated circuits (PICs). Perovskites can be deposited from solution and require only low-temperature processing, leading to significant cost reduction and enabling new PIC architectures compared to state-of-the-art lasers realized through the costly and inefficient hybrid integration of III−V semiconductors. Until now, however, due to the chemical sensitivity of perovskites, no microfabrication process based on optical lithography (and, therefore, on existing semiconductor manufacturing infrastructure) has been established. Here, the first methylammonium lead iodide perovskite microdisc lasers monolithically integrated into silicon nitride PICs by such a top-down process are presented. The lasers show a record low lasing threshold of 4.7 μJcm–2 at room temperature for monolithically integrated lasers, which are complementary metal–oxide–semiconductor compatible and can be integrated in the back-end-of-line processes.

Metal-halide perovskites are a class of solution processed materials with remarkable optoelectronic properties such as high photoluminescence quantum yields and long carrier lifetimes, which makes them promising for a wide range of efficient photonic devices. In this work, we demonstrate the first successful integration of a perovskite laser onto a silicon nitride photonic chip. High throughput, low cost optical lithography is used, followed by indirect structuring of the perovskite waveguide. We embed methylammonium lead tri-iodide (MAPbI) in a pre-patterned race-track microresonator and couple the emitted light to an integrated photonic waveguide. We clearly observe the build-up of spectrally narrow lasing modes at room temperature upon a pump threshold fluence of 19.6 µJcm. Our results evidence the possibility of on-chip lasers based on metal-halide perovskites with industry relevance on a commercially available dielectric photonic platform, which is a step forward towards low-cost integrated photonic devices.